+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Suspension, Transmission, Handling & Braking (https://www.306oc.co.uk/forum/forumdisplay.php?fid=19)
+--- Thread: which bolts for alloys please? (/showthread.php?tid=35891)
which bolts for alloys please? - Magenta Sunset - 05-05-2017
hi all,
just acquired some Laser alloys (thanks Adam) and want to know if;
do the bolts for steelies fit, or are they different?
thanks in advance.
RE: which bolts for alloys please? - Midnightclub - 05-05-2017
Have a look down the bolt holes, if they're flat you'll need some cyclone wheel bolts, if there's a taper then you'll need to get a tapered set - you can buy full sets tapered and flat seated ones off ebay now
RE: which bolts for alloys please? - Magenta Sunset - 05-05-2017
(05-05-2017, 11:24 AM)Midnightclub Wrote: Have a look down the bolt holes, if they're flat you'll need some cyclone wheel bolts, if there's a taper then you'll need to get a tapered set - you can buy full sets tapered and flat seated ones off ebay now
thanks
RE: which bolts for alloys please? - Midnightclub - 05-05-2017
No problem!
RE: which bolts for alloys please? - welshpug - 05-05-2017
lasers are only the early type seat, they have long headed bolts not the short cyclone type, though those will bolt on safely they will be a long way down the holes.
RE: which bolts for alloys please? - Magenta Sunset - 05-05-2017
thanks