+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: DW10 HDi section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=10)
+--- Thread: Swapping 3 plug to 1 plug (/showthread.php?tid=35638)
Swapping 3 plug to 1 plug - bashbarnard - 25-02-2017
So i might have a spare engine but its got the wrong loom on it. Is it possible to just swap the loom over on the engine as in are all the connectors the same??
RE: Swapping 3 plug to 1 plug - toseland - 25-02-2017
message cully or ruan, they will know
RE: Swapping 3 plug to 1 plug - cully - 25-02-2017
1 plug engine loom has extra body loom plugs the 3 plug engine ecu loom dosent have
Swapping 3 plug to 1 plug - Sambarker - 25-02-2017
I'm going the other way - single plug to 3 plug!
Sent from my iPhone using Tapatalk
RE: Swapping 3 plug to 1 plug - welshpug - 25-02-2017
just swap the loom plus any sensors that are different.
Swapping 3 plug to 1 plug - rocker8742 - 25-02-2017
I've got a single plug ecu if it's any good to you bash?
Sent from my iPhone using Tapatalk
Swapping 3 plug to 1 plug - bashbarnard - 25-02-2017
(25-02-2017, 03:54 PM)welshpug Wrote: just swap the loom plus any sensors that are different.
Yeah this is my only thought. I just want to know fuel pump and major bits are bot diffrent. I have my old broken hdi engine with its loom to go back in. But ive found a three plug setup i was gonna assume it was ok to be honest