306oc - Peugeot 306 Owners Club & Forum
Exhaust system for GTi (xu10j4rs) - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XU Petrol Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=17)
+--- Thread: Exhaust system for GTi (xu10j4rs) (/showthread.php?tid=35498)

Exhaust system for GTi (xu10j4rs) - -ER- - 23-01-2017

Hi friends

I will make new exhaust. But I dont want it to be too loud. I think 60mm chrome and 2 small tubes.
small tubes like this
[Image: cus_rou_stain-sil.jpg]
The exhaust will be custom made and the header will remain in the OEM.
What kind of system do you have in your vehicles? Do you have a video

RE: Exhaust system for GTi (xu10j4rs) - welshpug - 23-01-2017

you need a much larger rear silencer or your ears will bleed.

I have a Milltek on mine, but its a ZX and I don't think they made many for a 306, no videos yet.

RE: Exhaust system for GTi (xu10j4rs) - Eeyore - 23-01-2017

I have a piper system and its perfect

RE: Exhaust system for GTi (xu10j4rs) - Xsikid - 23-01-2017

I have a modified magnex on my 6 - decat on standard manifold and it's reasonable :-)

RE: Exhaust system for GTi (xu10j4rs) - allye - 23-01-2017

(23-01-2017, 08:51 PM)Xsikid Wrote: I have a modified magnex on my 6 - decat on standard manifold and it's reasonable :-)

Is that with a rotrex?

Trying to keep a 6 quite is quite hard in my experience! Looking around at systems for my van ar the moment.

RE: Exhaust system for GTi (xu10j4rs) - Xsikid - 24-01-2017

(23-01-2017, 11:35 PM)allye Wrote:
(23-01-2017, 08:51 PM)Xsikid Wrote: I have a modified magnex on my 6 - decat on standard manifold and it's reasonable :-)

Is that with a rotrex?

Trying to keep a 6 quite is quite hard in my experience! Looking around at systems for my van ar the moment.

Yes bud a rotrex. There is a small clip on you tube if you type in lynx high boost second video down 14 seconds long if that helps

RE: Exhaust system for GTi (xu10j4rs) - allye - 24-01-2017

2.5" is it?

I'm looking at making a mild steel 2.5 system with the biggest boxes I can fit under there to keep it quiet as possible!

RE: Exhaust system for GTi (xu10j4rs) - Xsikid - 24-01-2017

(24-01-2017, 05:08 PM)allye Wrote: 2.5" is it?

I'm looking at making a mild steel 2.5 system with the biggest boxes I can fit under there to keep it quiet as possible!

Yes mate 2.5

RE: Exhaust system for GTi (xu10j4rs) - -ER- - 26-01-2017

Thank you for your answers. Are you an OEM or 4-2-1? is it necessary ? Is there a big difference ?

RE: Exhaust system for GTi (xu10j4rs) - Lwilliams - 05-02-2017

The oem manifold is rated as very good for oem. It is tubular manfoild (not 100% sure if it's completely an equal length or it's just close just close) I think there is has been very little performance gains from anyone who has people going 4-2-1 over the standard set up with a good quality exhaust. Hope this helps.

RE: Exhaust system for GTi (xu10j4rs) - -ER- - 21-05-2017

Thank you for the information and ideas. I have built in 60 mm stainless steel, you can look at photos and videos

[Image: 34016912732_af387d94d1_c.jpg]20170420_131612 by Erel Hükerek, on Flickr
[Image: 34174139125_6625d446d5_c.jpg]20170420_133441 by Erel Hükerek, on Flickr
[Image: 34133511646_5055882d69_c.jpg]20170420_153923 by Erel Hükerek, on Flickr
[Image: 34133508136_b9856e7cfb_c.jpg]20170420_153932 by Erel Hükerek, on Flickr
[Image: 34016895192_6ec77d83c2_c.jpg]20170420_153938 by Erel Hükerek, on Flickr
[Image: 34133500076_5d174dc258_c.jpg]20170420_153947 by Erel Hükerek, on Flickr
[Image: 34016885172_52e8a3b575_c.jpg]20170420_165614 by Erel Hükerek, on Flickr
[Image: 34174116275_f2afabcf00_c.jpg]20170420_165619 by Erel Hükerek, on Flickr
[Image: 33331742324_6736b6b4c7_c.jpg]20170420_180013 by Erel Hükerek, on Flickr
[Image: 33331737814_6c818b270c_c.jpg]20170420_180023 by Erel Hükerek, on Flickr
[video=youtube;UgBjJ_bcZts]https://www.youtube.com/watch?v=UgBjJ_bcZts&feature=youtu.be[/video]

It got so loud to me that I got another muffler
[Image: 34768738216_770b3b8b90_c.jpg]20170506_145404 by Erel Hükerek, on Flickr
You can listen to this video from the outside
https://www.youtube.com/watch?v=_4rgXQP0fWo
and inside
https://www.youtube.com/watch?v=Fq4m3tSdSZs

RE: Exhaust system for GTi (xu10j4rs) - caglar1207 - 09-10-2017

Tebrikler kardesim guzel calisma olmus. [GRINNING FACE WITH SMILING EYES][GRINNING FACE WITH SMILING EYES][GRINNING FACE WITH SMILING EYES]

HUAWEI KII-L21 cihazımdan Tapatalk kullanılarak gönderildi

RE: Exhaust system for GTi (xu10j4rs) - welshpug - 09-10-2017

pardon?