+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Parts (https://www.306oc.co.uk/forum/forumdisplay.php?fid=25)
+--- Thread: FOR SALE: Bolt on IHI RHF5 kit SHINEY BITS INSIDE (/showthread.php?tid=35490)
Bolt on IHI RHF5 kit SHINEY BITS INSIDE - toseland - 19-01-2017
Pictures will follow.. for a HDi
this is for the following:
Oil lines and drain
turbo (unsure of condition, however these are dirt cheap and it was boosting well till the car got written off and will check before postage)
exhaust manifold
Subframe, with modified bespoke solid gear linkages and main gear linkage arm thingy (that goes between the stick and linkages)
Downpipe with flexi to weld onto mid section (this will need at LEAST a 2.25inch pipe to benefit most.
Pro-steve 26psi custom Map on single plug ECU, with BSI and two keyfobs for the car itself. - this is mapped for a STANDARD R65 pump and OEM sensor, i have also a map for an R70 and 1800bar sensor that can be included for extra pennies but at your own risk as this was not tested or run on the car.
£350 collected.. you can see pictures of the workmanship in my project thread in my signature..
RE: Bolt on IHI RHF5 kit SHINEY BITS INSIDE - Piggy - 19-01-2017
"for an HDi"
RE: Bolt on IHI RHF5 kit SHINEY BITS INSIDE - HDi--Power - 20-01-2017
Not a bad kit for the cash!
But you are correct with "a" the "an" term only applies when no consonant sound is made by the word, HDi is unreservedly "a", could never be "an"
RE: Bolt on IHI RHF5 kit SHINEY BITS INSIDE - Mattcheese31 - 20-01-2017
don't start with this again!
. . . . . some people do pronounce their Hatches/Aitches, whatever, i'm one of them, the way i speak means it's "a HDI" . . . . . call me wrong i don't care, i prefer it 
RE: Bolt on IHI RHF5 kit SHINEY BITS INSIDE - toseland - 20-01-2017
Nope, its all about pronounciation, "(h)otel" i pronounce HDI "haitch" which infers the correct use of "a"..
oxford english department agrees..
RE: Bolt on IHI RHF5 kit SHINEY BITS INSIDE - Poodle - 20-01-2017
It's "a" regardless of whether you mispronounce aitch or not.
HDi is an acronym, therefore not governed by normal grammatical rules, obviously.
RE: Bolt on IHI RHF5 kit SHINEY BITS INSIDE - Danny Wideboy - 20-01-2017
What is the acronym then Poodle?
I get the di bit.
RE: Bolt on IHI RHF5 kit SHINEY BITS INSIDE - Mattcheese31 - 20-01-2017
High pressure?
idk lol
RE: Bolt on IHI RHF5 kit SHINEY BITS INSIDE - Piggy - 20-01-2017
(20-01-2017, 04:31 PM)toseland Wrote: Nope, its all about pronounciation, "(h)otel" i pronounce HDI "haitch" which infers the correct use of "a"..
oxford english department agrees..
Oh how ironic.....
You spelt pronunciation wrong
RE: Bolt on IHI RHF5 kit SHINEY BITS INSIDE - Mattcheese31 - 21-01-2017
Anyone else who has the inability to pronounce the sound Haitch and feels the need to wax lyrical about the fact that the only reason it was dropped was because stupid, slack lipped aristocrats couldn't consistently form the sound, so they dispensed with it to save their embarrassment, will be walloped with the ban hammer, not least because I've disposed of half a bottle of bourbon and I'm sick of your irritating self assured claptrap x
RE: Bolt on IHI RHF5 kit SHINEY BITS INSIDE - Poodle - 21-01-2017
It's not clap trap, it's comedy gold.
And yeah, "high-pressure diseasel injection" iirc.
RE: Bolt on IHI RHF5 kit SHINEY BITS INSIDE - Piggy - 21-01-2017
*diesel
RE: Bolt on IHI RHF5 kit SHINEY BITS INSIDE - Mattcheese31 - 21-01-2017
direct i would have thought
time to go drink the other h alf the bottle, have you sold this yet or what Toseland?
RE: Bolt on IHI RHF5 kit SHINEY BITS INSIDE - Piggy - 21-01-2017
Wiki says
"high pressure direct injection"
https://en.m.wikipedia.org/wiki/PSA_HDi_engine
So must be true?