306oc - Peugeot 306 Owners Club & Forum
Breaking: Platinum silver ph2 xud dturbo - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Parts (https://www.306oc.co.uk/forum/forumdisplay.php?fid=25)
+--- Thread: Breaking: Platinum silver ph2 xud dturbo (/showthread.php?tid=35453)

Platinum silver ph2 xud dturbo - ozonehostile - 09-01-2017

I'll be breaking a platinum silver 3dr xud dturbo soon as I need to chop it up to make repair sections on matts rallye. 

It's only done 58k iirc 

Pretty much everything is for sale as It'll be a quick turnaround job as I don't have space for it, what doesn't sell by the time I've cut the floor and sills out will be weighed in. 

Highlights:

58k xud9te complete engine and gearbox - provisionally sold, awaiting confirmation

Direct fit Speedline chrono wheels, sold to Matt rallye

Gti6 brakes £40, rear beam £60, suspension £10, front arb £5

China blue panels; drivers side wing, ph3 bumper crack free with crystal foglights, ph3 grill. 
*wing and bumper provisionally sold 

Ph3 headlights with all tabs intact £20 

Platinum silver panels, whatever is left. Drivers door sold awaiting payment 

Interior is a bit of a state, just standard ph2 dturbo but if anyone wants anything it's free 

Standard exhaust system with decat, new around 4 months ago £10


Thats about it what I think is worth selling, if anyone wants anything else or obscure parts that are getting harder to find let me know, the more that goes the better :Smile

All parts collection from my workshop in Hereford, Herefordshire unless postage is covered/courier

RE: Platinum silver ph2 xud dturbo - td_dan - 09-01-2017

Zakk i got a mate who will take the brakes

Sent from my SM-A300FU using Tapatalk

RE: Platinum silver ph2 xud dturbo - ozonehostile - 09-01-2017

[Image: IMAG0291_zpsnre4zjn6.jpg]
(09-01-2017, 10:48 AM)td_dan Wrote: Zakk i got a mate who will take the brakes

Sent from my SM-A300FU using Tapatalk

Cool, I'll pm you when I get them off. The cars still rotting away at my mum's house at the moment so I'll plan a trip with Matt ASAP to get it over the unit

RE: Platinum silver ph2 xud dturbo - td_dan - 09-01-2017

in no rush pal

RE: Platinum silver ph2 xud dturbo - daddyfixit - 09-01-2017

drivers seat tilt handle ??? it splits into 2 halves so you can cut your fingers when seat jams as you try to tilt it !

RE: Platinum silver ph2 xud dturbo - ozonehostile - 11-01-2017

(09-01-2017, 06:40 PM)daddyfixit Wrote: drivers seat tilt handle ???   it splits into 2 halves so you can cut your fingers when seat jams as you try to tilt it !

You can have the whole seat if you want lol

RE: Platinum silver ph2 xud dturbo - ozonehostile - 26-01-2017

I've got this at the workshop now. Me and Matt even got it running with a bump start off the Landrover, it starts fine on the key now lmao wander what issue that was then

RE: Platinum silver ph2 xud dturbo - daddyfixit - 30-01-2017

(11-01-2017, 12:55 PM)ozonehostile Wrote:
(09-01-2017, 06:40 PM)daddyfixit Wrote: drivers seat tilt handle ???   it splits into 2 halves so you can cut your fingers when seat jams as you try to tilt it !

You can have the whole seat if you want lol

but getting it in an envelope will be a bit of a struggle   ???

RE: Platinum silver ph2 xud dturbo - RetroPug - 03-02-2017

Hi Zakk, which bits are you chopping off?

Will you be using the driver's side outer sill from the front arch backwards? If not, any chance of drilling out the spot welds and cutting it from the very start of it behind the front arch and going maybe 30cm rearwards? Don't need the whole length of the car just the front part. I welded a patch onto mine for the MOT but I'd like to cut it out and neatly weld in a replacement section.

Happy to cover postage and give you a bit for the trouble.

Also, if I could have a couple of the clips that hold the fuel lines under the car that'd also be really helpful.

Damn, just typed this and seen you're cutting the sills out. If by any chance you don't need the driver's side front part let me know!

RE: Platinum silver ph2 xud dturbo - ozonehostile - 04-02-2017

I haven't dared to take the skirts off matts rallye yet to see what kind of state they're in underneath but from the damage to the floor the rot extends all the way into the jacking point and probably beyond hence my plan to cut out the whole floor pan from the bulkhead back to behind the front jacking points. I'll pm you if what you need survives the cut though as I was wanting the entire outer sill skin for future 306 repairs as I see that becoming common now they're over 20 in some cases lol

RE: Platinum silver ph2 xud dturbo - RetroPug - 04-02-2017

Mine were remarkably fine it's just a previous owner mashed a jacking point which separated the skins and let rot in. Sad

All the rest were great considering it's an older 306!

Thanks for keeping me in mind. Do you have any of the fuel clips for the fuel lines under the car? Think they are probably the same on all 306 models?

RE: Platinum silver ph2 xud dturbo - ozonehostile - 05-02-2017

(04-02-2017, 08:11 PM)RetroPug Wrote: Mine were remarkably fine it's just a previous owner mashed a jacking point which separated the skins and let rot in. Sad

All the rest were great considering it's an older 306!

Thanks for keeping me in mind. Do you have any of the fuel clips for the fuel lines under the car? Think they are probably the same on all 306 models?

I'm going to the workshop today, I'll let you know Smile
(04-02-2017, 08:11 PM)RetroPug Wrote: Mine were remarkably fine it's just a previous owner mashed a jacking point which separated the skins and let rot in. Sad

All the rest were great considering it's an older 306!

Thanks for keeping me in mind. Do you have any of the fuel clips for the fuel lines under the car? Think they are probably the same on all 306 models?

I'm going to the workshop today, I'll let you know Smile

RE: Platinum silver ph2 xud dturbo - Kcbhoy111846 - 21-04-2017

do u still have china bumper and grill

RE: Platinum silver ph2 xud dturbo - hovis16 - 08-05-2017

Gear stick at all,

RE: Platinum silver ph2 xud dturbo - Jaysimo - 11-05-2017

Do you have the locking clip for the glove box and fuse box covers??

RE: Platinum silver ph2 xud dturbo - toseland - 11-05-2017

Zach mate, i need the bottom of the little clip from the seat release lever (from the side) please?


and the rear badge!