306oc - Peugeot 306 Owners Club & Forum
3L0W6 (rebuild) - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: 3L0W6 (rebuild) (/showthread.php?tid=350)

3L0W6 (rebuild) - sam - 12-12-2011

3l0w6
hi my name is sam im from the south west. i have a 1.4 meridian 306 which i bought in november 2010 after i rolled my saxo down a 30ftr drop. i bought the car bog standered and wanted it sutle. around feb time the court gave me a 3month ban and a £950 fine which i wasted expecting this is how it looked when i first bought it....
[Image: pug8.jpg]

[Image: pug9.jpg]

nothing really changed in the 3 months as i really lost interest in it but after the 3 month ban i had a massive tax rebait
which i bought pressed plates and hid's at french car show and some black paint to spray the alloys and badge
. i also dewipered it which was a ball ache for soe reason haha
[Image: pug7.jpg]
[Image: pug11.jpg]

and i bought some coilovers aswell
[Image: pug12.jpg]

after the coilover were sat in my room for a couple of months i didnt want the sutle approuch anymore so i got my mate to lower my pug so the helper springs came out appox 120mm drop at the front!
[Image: pug14.jpg]
[Image: pug15.jpg]

i was going to have to torsoin bar sat the same but i didnt no if it was going to look alright so got james to set the torsoin bar a tad higher at 110mm
[Image: pug16.jpg]
after waiting for the coilovers to settle me and my friends had a little photoshoot wasnt anything special
[Image: pug4.jpg]
[Image: pug1.jpg]
[Image: pug2.jpg]
[Image: thepug.jpg]

usc time got a bit borad with it all red
[Image: pug3.jpg]
so walked round main event and came across ambient vyinals had a little look round at what they had and picked out a red camo for my bonnet just wanted to have something a little different to what everyone else does after an hour of waiting i was really happy with the resault
[Image: pug20.jpg]

Re: 3L0W6 (rebuild) - sam - 12-12-2011

a little update i decided to spray my alloys white due to it not going with the white back ground from my bonnet
[Image: pug18.jpg]
so i organized a lil photo shoot with my friends lol would of updated it earllier but i have only just got the pictures through here they are let me no what you think.....
[Image: puggggg.jpg]
[Image: pugg.jpg]
[Image: puggg.jpg]
right heres the 6 lump in...
[Image: 317466_2426964605471_1592226862_32474454...1932_n.jpg]
i have now put on some 306 rallye blanks, new 307 xsi 283 mintex brakes and pads with 307 xsi callipers also have a moongose exhaust system as the last one had an epic blow, didnt fit propperly, was too small and sound like a bake been tin, smooth reay bumper front one is in the process and the boot lid needs to put on so ill have a few things for sale soon ....
[Image: 383870_2426965405491_1592226862_32474456...7519_n.jpg]
[Image: 315829_2426965045482_1592226862_32474455...6204_n.jpg]
[Image: 302581_2426966085508_1592226862_32474457...6090_n.jpg]

Re: 3L0W6 (rebuild) - sam - 12-12-2011

and this is how she stands today Sad
[Image: 387955_2190133719615_1435265909_31761735...8021_n.jpg]
[Image: 376380_2190140839793_1435265909_31761737...9056_n.jpg]

the plan was to strip her and sell her for parts and get an hdi but i changed my mind a few days after stripping her, as i have a 1 or 2 year to get her the way i want to its going to come back a different colour alot more engine work either bodies or a turbo dont want to sc it as i realy havent seen a turbo 6 yet...
let me no what you think people

cheers sam

Re: 3L0W6 (rebuild) - Matt - 12-12-2011

So after I came over took the bumpers and interior out you gunna keep haha

Good job I didn't take anything off the car that was important haha

Re: 3L0W6 (rebuild) - Dum-Dum - 12-12-2011

She looks good, especially with a 6 engine

Re: 3L0W6 (rebuild) - sam - 12-12-2011

yeah but might aswell clean it up while there out Smile and start putting it back together Smile

cheers chris wish it was still on the road when i went to the pug306 christmas meet Sad ( oh i was the person with chris i was wereing the fast car hoodie ) hopefully ready for next years though

Re: 3L0W6 (rebuild) - Matt - 12-12-2011

Shouldn't take much to put her all back together.

Oh can you ask your mate how much to respray the rear quarters on both sides.

Some lady garden has keyed my car

Re: 3L0W6 (rebuild) - sam - 12-12-2011

na shouldnt be long well ive got a year or so todo it in lol

yeah will do probs around £500

oh how did you doing your signature?

Re: 3L0W6 (rebuild) - Matt - 12-12-2011

Curt did my signature Smile Ahhh £500 isn't too bad. May look into it round rear me see how much it is

Re: 3L0W6 (rebuild) - sam - 12-12-2011

ahhh cool Smile yeah will do well my whole paint job is around £850 ill let you no bud

Re: 3L0W6 (rebuild) - Dum-Dum - 12-12-2011

sam Wrote:yeah but might aswell clean it up while there out Smile and start putting it back together Smile

cheers chris wish it was still on the road when i went to the pug306 christmas meet Sad ( oh i was the person with chris i was wereing the fast car hoodie ) hopefully ready for next years though

Yeah i remember, the well built bloke. I was the dude in the bee costume.

Re: 3L0W6 (rebuild) - sam - 12-12-2011

haha yeah i remember you wore it to scare fooby lol

Re: 3L0W6 (rebuild) - Kaeten M - 13-12-2011

this is nice Big Grin

Re: 3L0W6 (rebuild) - sam - 13-12-2011

Thanks Smile it has a lot of work to be down though hopefully fingers crossed it'll be ready for freench car show next year or pugfest Smile

Re: 3L0W6 (rebuild) - procta - 14-12-2011

id be temped to phase 1 it for a change and keep it sleeper.

Re: 3L0W6 (rebuild) - Eeyore - 14-12-2011

After all that work and you end up stripping it! Bad times! Oh well good to hear its going back together! Big Grin

Re: 3L0W6 (rebuild) - sam - 14-12-2011

I was tempered but I got smooth bumpers to go on but hopefully getting a phase one stub for a daily soon, yeah same im glad im not stripping to I don't think I could to be honest

Re: 3L0W6 (rebuild) - Pugmarshall - 14-12-2011

build it even better and you can't lose! Big Grin

Re: 3L0W6 (rebuild) - sam - 14-12-2011

Thats the plan chap Big Grin

Re: 3L0W6 (rebuild) - Jake - 14-12-2011

Turbo-6... when is this happening then ninja ..

As said on t'other forum... really like this !

Re: 3L0W6 (rebuild) - sam - 14-12-2011

Hopefully and when I get £2,700 and thanks dude Smile

Re: 3L0W6 (rebuild) - sam - 17-02-2012

havent been on here in a while so ill do an update Big Grin

[Image: 407921_2445292538426_1435265909_31870423...4526_n.jpg]
[Image: 401236_2445298218568_1435265909_31870425...6476_n.jpg]
[Image: 402563_2445302778682_1435265909_31870427...1256_n.jpg]
[Image: 398050_2445309378847_1435265909_31870429...5563_n.jpg]
[Image: 394169_2445315499000_1435265909_31870432...6259_n.jpg]
[Image: 395444_2432192090923_1435265909_31863470...0495_n.jpg]

Re: 3L0W6 (rebuild) - sam - 17-02-2012

[Image: 398602_2445321619153_1435265909_31870433...5732_n.jpg]
[Image: 396766_2432185210751_1435265909_31863468...1801_n.jpg]
[Image: 407014_2445325099240_1435265909_31870434...5250_n.jpg]

as off now the D2's are on and the new beam is on to

cheers sam

3L0W6 (rebuild) - MarkTD - 17-02-2012

The bonnet looks mint!