+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Suspension, Transmission, Handling & Braking (https://www.306oc.co.uk/forum/forumdisplay.php?fid=19)
+--- Thread: 406 Brembos with Nimrods (/showthread.php?tid=3490)
406 Brembos with Nimrods - friar241 - 15-05-2012
Hi
Possibly looking at 406 V6 Brembos eventually but have read about clearance issues with the spokes and wheel size.
I'm running 16" 206 Nimrods at the moment and no spacers on the front so ET if I remeber correct is 25 (I think)
Would there be any issues at all or would these literally be a bolt on and use the Xantia V6 discs?
Thanks
Luke
Re: 406 Brembos with Nimrods - Eeyore - 15-05-2012
Should fit behind 16" alloys iirc and any other problem should be solved by spacers. I dont know much about offset etc so dont take my word for it but that is my thoughts!
Re: 406 Brembos with Nimrods - friar241 - 15-05-2012
I would have thought yes to the 16" as well as the shark fin alloys off the 406 are 16's but couldnt remember if they are from the V6.
Anyone know the ET of the shark fin alloys as these would clear it I reckon so I can see if spacers are required and what size if so
Re: 406 Brembos with Nimrods - TheGateKeeper - 15-05-2012
Any good? http://www.carlsalter.com/peugeot-wheel-fitments.html
Re: 406 Brembos with Nimrods - friar241 - 15-05-2012
TheGateKeeper Wrote:Any good? http://www.carlsalter.com/peugeot-wheel-fitments.html
Thanks
Looks like 10mm spacers to me if I'm remembering ETs correctly
Re: 406 Brembos with Nimrods - swampy - 15-05-2012
Would need new hoses as well
Either with a banjo end or to fit the metal link pipe, all items I cansupply
Re: 406 Brembos with Nimrods - Seid' - 17-05-2012
et20 or 28 i think
Re: 406 Brembos with Nimrods - puglove - 17-05-2012
Iirc you need a 20mm spacer with cyclones which would make it ET -2 so im guessiyou wouldnt get away with no spacer on a nimrod