306oc - Peugeot 306 Owners Club & Forum
Intercooler size - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: Intercooler size (/showthread.php?tid=34811)



Intercooler size - unclebeast - 10-09-2016

So my project is a 405 estate now with an xud9te in place which I purchased without the intercooler, no problem I thought will buy one on ebay...but the one that was sold to me had 306td in small yellow paint letters on it when it arrived and its a different size with a slightly different right bracket (as you look from the front), could anyone tell me the dimensions of the one i need for the air scoop under bonnet to line up...I cannot find a thing online.
OR if you have one lying around in GWO I would buy it*...the scrap yards round here (Bury) are crushing them on arrival

* or a complete FMIC setup for a 405 ...


RE: Intercooler size - Mattcheese31 - 11-09-2016

They will both fit, I believe the 405 one is a slightly different size though, smaller I think, I think I have the intercooler but not the plastic surround that makes it flush to the bonnet...


RE: Intercooler size - unclebeast - 11-09-2016

(11-09-2016, 02:02 AM)Mattcheese31 Wrote: They will both fit, I believe the 405 one is a slightly different size though, smaller I think, I think I have the intercooler but not the plastic surround that makes it flush to the bonnet...

I have the surround off the 405 intercooler and it will not fit the 306 intercooler, Im interested Matt


RE: Intercooler size - Mattcheese31 - 11-09-2016

I'll have a look fella

Measure yours and I'll measure mine lol


RE: Intercooler size - unclebeast - 11-09-2016

the 306 intercooler plastic frame (that pushes over) is approx 5.5" x 19.75"
the plastic surround for the 405 intercooler (that seems to clip on) is approx 5.75" x 17.75"


RE: Intercooler size - Mattcheese31 - 11-09-2016

I'll fish it out mate


RE: Intercooler size - Dave - 16-09-2016

Also for the TMIC i've had both thin and thick versions but ideally you want the thin one as thick one squashes the airways to the top of the IC.


RE: Intercooler size - unclebeast - 16-09-2016

Hows the fishing Matt???


RE: Intercooler size - Mattcheese31 - 16-09-2016

(16-09-2016, 05:33 PM)unclebeast Wrote: Hows the fishing Matt???

sorry dude, been a bit busy, just off to work and off to Donington first thing in the morning, i'll cast off Sunday all being well lol


RE: Intercooler size - unclebeast - 19-09-2016

Matt...I have had to recast my line to ebay and have reeled one in mate...the nights are darkening and I have project fever, plus the 306dturbo intercooler fitted in my XUD9TE re-engined 405 don`t line up wit` liner...


RE: Intercooler size - Mattcheese31 - 19-09-2016

(19-09-2016, 07:44 PM)unclebeast Wrote: Matt...I have had to recast my line to ebay and have reeled one in mate...the nights are darkening and I have project fever, plus the 306dturbo intercooler fitted in my XUD9TE re-engined 405 don`t line up wit` liner...

nice one mate, sorry I'm so slow lol Smile