+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Interior, Exterior, ICE (https://www.306oc.co.uk/forum/forumdisplay.php?fid=12)
+--- Thread: Fixing air con!! (/showthread.php?tid=34764)
Fixing air con!! - bashbarnard - 30-08-2016
So ive got a price of £130 for the air con pipe thats recently leaked on mine. Runs from the compressor then up into the bay down the n/s. Im sure someone had said that the xsara one was routed better though for some reason. Can any one shed some light on this
RE: Fixing air con!! - Alan_M - 31-08-2016
(30-08-2016, 05:18 PM)bashbarnard Wrote: So ive got a price of £130 for the air con pipe thats recently leaked on mine. Runs from the compressor then up into the bay down the n/s. Im sure someone had said that the xsara one was routed better though for some reason. Can any one shed some light on this
According to Citroen.Servicebox, the Xsara 1 were the same as the 306. Xsara IIs were different, but they also used different condensers/compressors etc.
£130? Where from. There was an old post on here where someone got a pipe repaired by Pirtek. They also pop up from time to time on Ebay.
My AC has given up again.....compressor this time.
Fixing air con!! - bashbarnard - 31-08-2016
£130 direct from peugeot including my discount. Thats inc vat as well.
Sent from my iPhone using Tapatalk
RE: Fixing air con!! - toseland - 11-09-2016
Phone around some local Air conditioning places,.. most will be able to , or know where to get some made up..
Fixing air con!! - MisterGTR - 11-09-2016
I got new pipes off eBay. I still have my old ones which I think were fine as it was a coupling that had broken and the new pipes made no difference.
If your really struggling I can get my gas fitter mate to pressure test my old ones and you can have them for a reasonable price.
But I did read about the pirtek being able to make up pipes
RE: Fixing air con!! - DeeTurbo - 12-09-2016
Yeah some Pirtek places might swage a pipe on but most are lazy f*ckers and say it's not possible.