+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Suspension, Transmission, Handling & Braking (https://www.306oc.co.uk/forum/forumdisplay.php?fid=19)
+--- Thread: 306 and 206 alloy wheel fitment (/showthread.php?tid=3475)
306 and 206 alloy wheel fitment - Welshy_Pete - 14-05-2012
The alloy wheels fitment diffrence on the 306 and 206 what diffrence will there be?
306
93 to 01
4x108 Pcd
15 to 20 Offset
65.1 Bore
206
98>
4x108 Pcd
20 to 25 Offset
65.1 Bore
Re: 306 and 206 alloy wheel fitment - 4WayDiablo - 14-05-2012
Well you have it all written out there? I don't get what your asking?
10mm spacers usually
Re: 306 and 206 alloy wheel fitment - Scott - 14-05-2012
The only real difference is the offset...you need to run spacers (and tyre sizes, actually) to fit them to a 306 without them scrubbing.
Re: 306 and 206 alloy wheel fitment - Welshy_Pete - 14-05-2012
4WayDiablo Wrote:Well you have it all written out there? I don't get what your asking?
10mm spacers usually
Im not that good with the fitment sides.
I just know like ford peugeot then vauxhall vw what fit what etc.
So the 10mm spaces will bring the wheels out more I take it?
Is that cause they tutch something?
thanks
Re: 306 and 206 alloy wheel fitment - Welshy_Pete - 14-05-2012
Scott Wrote:The only real difference is the offset...you need to run spacers (and tyre sizes, actually) to fit them to a 306 without them scrubbing.
What will 205 40 17 from 206 wheels be like on the 306?
Re: 306 and 206 alloy wheel fitment - 4WayDiablo - 14-05-2012
Get the offset right and it will be fine
The 306 optimum etc is about 18
Re: 306 and 206 alloy wheel fitment - Toby - 14-05-2012
Welshy_Pete Wrote:Scott Wrote:The only real difference is the offset...you need to run spacers (and tyre sizes, actually) to fit them to a 306 without them scrubbing.
What will 205 40 17 from 206 wheels be like on the 306?
Depends on the offset buddy.
For 205's you do need to be careful with offset, especially if your car is lowered.
Re: 306 and 206 alloy wheel fitment - Welshy_Pete - 14-05-2012
I was thinking of keeping the height standard for now on the 205 40 17s
Re: 306 and 206 alloy wheel fitment - 4WayDiablo - 14-05-2012
Standard height on 17's looks silly especially on the rear
Re: 306 and 206 alloy wheel fitment - Welshy_Pete - 14-05-2012
4WayDiablo Wrote:Standard height on 17's looks silly especially on the rear
How much mm need lowering on the back to match the front?
Re: 306 and 206 alloy wheel fitment - Eeyore - 15-05-2012
4WayDiablo Wrote:Standard height on 17's looks silly especially on the rear
sure does!
![[Image: 2011-05-17203820.jpg]](http://i1184.photobucket.com/albums/z327/srowell3/2011-05-17203820.jpg)
![[Image: IMG_6159.jpg]](http://i1184.photobucket.com/albums/z327/srowell3/IMG_6159.jpg)
this was parkedd on a really big hill! Looked alright then!
![[Image: IMG_6147.jpg]](http://i1184.photobucket.com/albums/z327/srowell3/IMG_6147.jpg)
Re: 306 and 206 alloy wheel fitment - Joe - 15-05-2012
who paints drums! that does my head in lol
306 and 206 alloy wheel fitment - Matt - 15-05-2012
Sam I forget how post awfull those wheels were haha. So glad you got rid
Re: 306 and 206 alloy wheel fitment - 4WayDiablo - 15-05-2012
That looks lowered my mate is on challengers and on the rear I can get my fist in!
They say arch gap is like a vagina, the more you can get in the worse it is....
Re: 306 and 206 alloy wheel fitment - Welshy_Pete - 17-05-2012
4WayDiablo Wrote:That looks lowered my mate is on challengers and on the rear I can get my fist in!
They say arch gap is like a vagina, the more you can get in the worse it is....
Re: 306 and 206 alloy wheel fitment - Welshy_Pete - 17-05-2012
So 17inch the back will need lowering maybe 30mm or 40mm?
What other sizes like 15 or 16inch will be fine with out any lowering?
Re: 306 and 206 alloy wheel fitment - Joe - 17-05-2012
it ''doesnt'' need to be lowered but it looks alot better
Re: 306 and 206 alloy wheel fitment - puglove - 17-05-2012
If you dont space them it will rub the back of the arch wearing the tyre and plastic.
If you dont lower it it will look like a monster truck
If you dont lower it you will look like a chav who has just bought a set of 17s cuz they sick
you will also need longer bolts or bolt on type hubsentric spacers
do not be tempted to buy cheaper non hubcentric spacers as it will be dangers as the wheel will have no sprigot to sit on
And be warned 17s with a 40 profile will make for a rough noisy ride
hope the info helps a bit?
Re: 306 and 206 alloy wheel fitment - Welshy_Pete - 19-05-2012
puglove Wrote:If you dont space them it will rub the back of the arch wearing the tyre and plastic.
If you dont lower it it will look like a monster truck
If you dont lower it you will look like a chav who has just bought a set of 17s cuz they sick
you will also need longer bolts or bolt on type hubsentric spacers
do not be tempted to buy cheaper non hubcentric spacers as it will be dangers as the wheel will have no sprigot to sit on
And be warned 17s with a 40 profile will make for a rough noisy ride
hope the info helps a bit?
It sure does thanks
Re: 306 and 206 alloy wheel fitment - Welshy_Pete - 19-05-2012
puglove Wrote:If you dont space them it will rub the back of the arch wearing the tyre and plastic.
If you dont lower it it will look like a monster truck
If you dont lower it you will look like a chav who has just bought a set of 17s cuz they sick
you will also need longer bolts or bolt on type hubsentric spacers
do not be tempted to buy cheaper non hubcentric spacers as it will be dangers as the wheel will have no sprigot to sit on
And be warned 17s with a 40 profile will make for a rough noisy ride
hope the info helps a bit?
The hubcentric spacers is there certon makes which are good ones over crap ones?
Re: 306 and 206 alloy wheel fitment - puglove - 19-05-2012
Not especially mate. Obv you get better brands and cheaper brands but to be totaly honest there is no difference in preformance.