+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Electrics (https://www.306oc.co.uk/forum/forumdisplay.php?fid=23)
+--- Thread: Wiring loom adoption (/showthread.php?tid=34732)
Wiring loom adoption - mattbarker32 - 21-08-2016
Hi can anyone comfirm if
1 its possible to use the orginal wire and just connect it to the wiring on to new twin slimline fans
And
2 if it is do i need specific fans for the job.
Any help would be great.
Sent from my GT-I9505 using Tapatalk
Wiring loom adoption - bashbarnard - 21-08-2016
I always use the original woiring for slimline fans. Strip it out the standard fan fowling then shorten it where its needed. As for what fans you want i used to tun a cheap ebay fan on my 2.1 and it kept tenps down in trffic no issues. However there are better thats a really "where is your project going" type thing
Sent from my iPhone using Tapatalk
RE: Wiring loom adoption - mattbarker32 - 21-08-2016
Cheers pal just having to rebuild my front end as a result of a old selecting reverse. No real damage to look at but just stripped it and its bent the aircon rad and smashed the fans etc was thinking about doing a fmic any way was just not sure about the fans. Does it make a difference been a hdi with the wiring and the two stages it has. Would that be kept if i all the 3 relays etc.
Sent from my GT-I9505 using Tapatalk
Old fart bloody auto correct.
Sent from my GT-I9505 using Tapatalk