306oc - Peugeot 306 Owners Club & Forum
Best bodywork sealant/adhesive? - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: General (https://www.306oc.co.uk/forum/forumdisplay.php?fid=6)
+--- Forum: The Couch (https://www.306oc.co.uk/forum/forumdisplay.php?fid=7)
+--- Thread: Best bodywork sealant/adhesive? (/showthread.php?tid=3441)



Best bodywork sealant/adhesive? - C.A.R. - 13-05-2012

Right, finally got hold of an ST170 spoiler for my Ford dieselbus, I also managed to bag an adhesive kit un-used for £20.

It transpires that you need a Ford Sealant Gun (essentially a sealant gun which holds two cans of adhesive aptly named component A and component B, mixes them together in one nozzle). Ford want an additional £17.03 for this piece of plastic I will never re-use.

Just wondering what peoples' experiences were like with the likes of Tiger Seal and other products, Silkaflex is another one.

I need enough to put a bootlid spoiler on, with a quite large contact patch. How far does one bottle go, what should I look to spend and where can I get it?

Lemme know folks!


Re: Best bodywork sealant/adhesive? - Grant - 13-05-2012

I've never had any problems with tiger seal. Never hear bad stuff about it. It's still holding my spoiler on well now too as it happens!


Re: Best bodywork sealant/adhesive? - C.A.R. - 13-05-2012

Cool. What's it like to apply, messy or anything? I've used gasket sealant before but never bodywork stuff. Is it very similar? Ie. to the un-trained eye it just looks like bath sealer?! lol


Re: Best bodywork sealant/adhesive? - Jonny81191 - 13-05-2012

can't you just mix the adhesives on a bit of plastic and apply it with a spatula?


Re: Best bodywork sealant/adhesive? - Connor - 13-05-2012

Use clear silicone lol


Re: Best bodywork sealant/adhesive? - 4WayDiablo - 13-05-2012

Tiger seal had held on my spoiler for a year


Re: Best bodywork sealant/adhesive? - cwspellowe - 13-05-2012

Tiger seal is rock solid when applied properly, just make sure you give it time to cure. I tigersealed my SP spoiler on the gti and went for a drive an hour later and it fell off, best give it 24 hours to cure.


Re: Best bodywork sealant/adhesive? - Eeyore - 13-05-2012

We use sikaflex at work for sealing boat hatches and stuff. Id say it was a sealant but i wouldnt sticking anything on with it! D:


Re: Best bodywork sealant/adhesive? - kingy - 13-05-2012

tiger seal. thats it.


Re: Best bodywork sealant/adhesive? - C.A.R. - 13-05-2012

Jonny81191 Wrote:can't you just mix the adhesives on a bit of plastic and apply it with a spatula?

The fun bit's gonna be getting the two out of their respective tubes. They're like a sealant tube only smaller...

Will look into getting a tube of Tiger Seal...


Re: Best bodywork sealant/adhesive? - Jonny81191 - 13-05-2012

push an extension bar into it where the sealant gun would go?


Re: Best bodywork sealant/adhesive? - WiNgNuTz - 13-05-2012

I stuck my spoiler on with tiger seal yesterday, seems to have stick fine, held the spoiler on with masking tape long enough for the TS to cure, and it seems fine. Just make sure you use enough of it to get a good grip, any excess that splodges out the sides can be trimmed back once its set properly.


Re: Best bodywork sealant/adhesive? - Toby - 13-05-2012

Guys.. I just found this great product while surfing the net.

I reckon it will do the job perfectly.



ninja







[Image: nomorenialls.png]


Re: Best bodywork sealant/adhesive? - samass - 13-05-2012

lmao


Re: Best bodywork sealant/adhesive? - Niall - 13-05-2012

Remember how your car was red Toby? It will now be silver.....metal finish to be precise!

Smile


Re: Best bodywork sealant/adhesive? - Toby - 13-05-2012

Niall Wrote:Remember how your car was red Toby? It will now be silver.....metal finish to be precise!

Smile

Sounds like a good surface for.....

More carbon wrap??! :mrgreen:


Re: Best bodywork sealant/adhesive? - Niall - 13-05-2012

Toby Wrote:
Niall Wrote:Remember how your car was red Toby? It will now be silver.....metal finish to be precise!

Smile

Sounds like a good surface for.....

More carbon wrap??! :mrgreen:

Only thing that is going to be wrapped is your cold corpse.....in carpet


Then swiftly thrown off a bridge!


Re: Best bodywork sealant/adhesive? - procta - 13-05-2012

Tiger seal is strong stuff! sorted a leak out on the rover, but by christ its a sod to get off your hands!!!