Rattle on lift off? - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16) +--- Forum: DW10 HDi section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=10) +--- Thread: Rattle on lift off? (/showthread.php?tid=34201) |
Rattle on lift off? - JTaylor2005 - 30-05-2016 I have like a loud rattle on lift off. Do you guys reckon its probably the aux pulley? I had one of unknown source fitted and it was better condition than my old one but that was about a year ago now. If thats most likely the cause whats a good brand one to buy? there are loads to choose from on here tbf http://www.mister-auto.co.uk/en/crankshaft-pulley/peugeot-306-hatchback-7a-7c-n3-n5-2-0-hdi-90-90hp_v12406_g3213.html?search_toolbar_query=pulley Thanks RE: Rattle on lift off? - Frosty - 30-05-2016 If it is the bottom pulley a lot change them to the a solid 1 like on the 307s. Have a look at the pulley and see if there is an dust around it and pop the belt off and see how it feels. RE: Rattle on lift off? - JTaylor2005 - 30-05-2016 Will do. So any 307 one will do really? I heard something about them causing lumpy running?? RE: Rattle on lift off? - Frosty - 30-05-2016 One like this be should be ok http://www.ebay.co.uk/itm/271140727424?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT I just got a 2nd hand 1 on mine. I haven't heard about the lumpy running, mine seems ok. RE: Rattle on lift off? - JTaylor2005 - 30-05-2016 Ahh brilliant and they are just direct fit replacements? Thanks mate RE: Rattle on lift off? - Frosty - 31-05-2016 Yeah straight swap RE: Rattle on lift off? - Eeyore - 31-05-2016 its either cambelt scrubbing the casing or a pulley that needs replacing. Had it on mine. Once cambelt was replaced and pulleys replaced it went away! RE: Rattle on lift off? - JTaylor2005 - 31-05-2016 I dunno what could rattle on a rubber belt though tbf I would guess at the pulleys more likely tbh RE: Rattle on lift off? - Poodle - 31-05-2016 Get the drivers front jacked up and take the wheel off. Take the arch liner out, then start the car (make sure it's not in gear and the handbrake is on lol) and watch the pulley yourself. If it's knackered you'll see it jumping about and running off-centre. RE: Rattle on lift off? - JTaylor2005 - 01-06-2016 Nice. Will get that done some time soon. On nights this week. Always feel dead when I'm on nights haha. |