+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Electrics (https://www.306oc.co.uk/forum/forumdisplay.php?fid=23)
+--- Thread: Radiator temp sensor pin out (/showthread.php?tid=34027)
Radiator temp sensor pin out - zx_volcane - 09-05-2016
Hey, does anyone know the pin out for the 3 pin temp sensor in the rad please?
Want to wire my slim line fans to cone on without switch and I've removed the original loom.
Thanks in advance
RE: Radiator temp sensor pin out - welshpug - 09-05-2016
I can sort you out later, got a haynes manual for the ZX to hand ijn the workshop, nicely self contained thing connected to the shunt box, I'd get hold of another if you can.
RE: Radiator temp sensor pin out - powerandtorque - 09-05-2016
Single speed (2 pin switch) or twin speed (3 pin switch)?
Single speed:
Pin 1 = +12v feed
Pin 3 = Fan output
Twin speed:
Pin 1 = +12v feed
Pin 2 = High speed fan output
Pin 3 = Slow speed fan output
That's going by the post-97 306 Haynes manual (see attached)
RE: Radiator temp sensor pin out - zx_volcane - 10-05-2016
(09-05-2016, 12:34 PM)welshpug Wrote: I can sort you out later, got a haynes manual for the ZX to hand ijn the workshop, nicely self contained thing connected to the shunt box, I'd get hold of another if you can.
(09-05-2016, 03:09 PM)powerandtorque Wrote: Single speed (2 pin switch) or twin speed (3 pin switch)?
Single speed:
Pin 1 = +12v feed
Pin 3 = Fan output
Twin speed:
Pin 1 = +12v feed
Pin 2 = High speed fan output
Pin 3 = Slow speed fan output
That's going by the post-97 306 Haynes manual (see attached)
Thanks both
