+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: my peugeot 306 meridian 1.9 td project (/showthread.php?tid=33907)
my peugeot 306 meridian 1.9 td project - alex76 - 25-04-2016
This is my project and my very much loved motor now I have seen some lush 306's on this forum but mine is looking in a bit of a sorry state at the moment.
just before my 306 come off the road there was a knocking and a grinding coming from passenger side strut which I hope I have now sorted.
now I do have a little mechanical experience but not loads so I am also learning as I go
so if its ok with you guys I would like to share my progress as the works go on
so this is my Peugeot 306 meridian 1.9 td 98 plate phase 2
I do spend most of my days off working on my 306 to my other halves delight and I will share as I progress
Thanks for looking
RE: my peugeot 306 meridian 1.9 td project - Iaitoo - 25-04-2016
Looks like a nice car
What are your plans for it?
RE: my peugeot 306 meridian 1.9 td project - alex76 - 25-04-2016
(25-04-2016, 02:36 PM)Iaitoo Wrote: Looks like a nice car
What are your plans for it?
well basically I would like to sort its problems the suspension which should be sorted new disc pads all round, the radiator is shot so that's on the shopping list give it a full service filters oil change etc.
when the car was on the road I found the headlights were not great on normal beam (the Mondeo I use now I have same problem so maybe its my eyes as I am getting older) so I would like some modern headlights LED maybe but got some good info from one of the mods from the forum and need to research them a bit more.
I would like to tidy her up phase 3 bumper with round fogs and a nice set of alloys and go from there really working on the car is starting to be addictive so who knows how she will look when I'm done lol.
RE: my peugeot 306 meridian 1.9 td project - alex76 - 26-04-2016
phase 1 complete new discs and pads fitted got her started pulled her out the garage and back now its time to start on the engine happy as a pig in shite
RE: my peugeot 306 meridian 1.9 td project - Magenta Sunset - 26-04-2016
nice.
if you do go for alloys, can I have 1st dibs on your wheel-trims please? (if they're 15inch)
RE: my peugeot 306 meridian 1.9 td project - alex76 - 26-04-2016
(26-04-2016, 05:01 PM)Magenta Sunset Wrote: nice.
if you do go for alloys, can I have 1st dibs on your wheel-trims please? (if they're 15inch)
yeah no probs mate need a clean up but all yours mate
RE: my peugeot 306 meridian 1.9 td project - zx_volcane - 26-04-2016
(25-04-2016, 10:51 AM)alex76 Wrote: so if its ok with you guys I would like to share my progress as the works go on
course it is
good start so far, satisfying to give a car some love and attention, and you'll learn loads by taking it on yourself
RE: my peugeot 306 meridian 1.9 td project - Magenta Sunset - 26-04-2016
(26-04-2016, 07:18 PM)alex76 Wrote:(26-04-2016, 05:01 PM)Magenta Sunset Wrote: nice.
if you do go for alloys, can I have 1st dibs on your wheel-trims please? (if they're 15inch)
yeah no probs mate need a clean up but all yours mate
cheers buddy
RE: my peugeot 306 meridian 1.9 td project - alex76 - 03-05-2016
just an update to this weeks works....
stripped out the rad and what a pain it was to get out then got new rad but the bottom hose wrong connection so waiting on phone call from euro car parts for new hose another 28 quid and this weeks budget gone hate it when works comes to a standstill waiting on parts (like a child stomping feet lol)
RE: my peugeot 306 meridian 1.9 td project - maxaret - 04-05-2016
Yeah I remember changing a rad on a friends 306 DW8 diesel - it was definitely the case of 'wtf did i volunteer to do this for',the car was in the wilds of Dorset (nice
)- one of the 'quick release' hose fittings was so corroded internally that I had to saw it off and I was lucky that the peugeot dealer 15 miles away had a hose in stock - dashed down there just before closing time on saturday (car had to be driveable by monday)
.
RE: my peugeot 306 meridian 1.9 td project - alex76 - 09-05-2016
update to this weeks works..
New rad fitted flushed filled and bled but whilst getting the old girl up to temperature as you do, this little bitch decided to leak, now I am not sure what it is (a big round plug with an allen key fitting which no one has that size in there tool box) to be fair I did only slightly tighten it with a pair of moulgrips so back to tool shop tomorrow... but so far so good...
RE: my peugeot 306 meridian 1.9 td project - alex76 - 10-05-2016
leak sorted engine running normal temp heater working = happy days
RE: my peugeot 306 meridian 1.9 td project - alex76 - 16-05-2016
oh shit where does this go.... pmsl
RE: my peugeot 306 meridian 1.9 td project - JTaylor2005 - 16-05-2016
(16-05-2016, 04:43 PM)alex76 Wrote: oh shit where does this go.... pmsl
Tyre for a penny farthing wheel??
RE: my peugeot 306 meridian 1.9 td project - alex76 - 16-05-2016
bloody hell mate.... I just bought another one don't think the wheels are big enough though lol.. love it
RE: my peugeot 306 meridian 1.9 td project - alex76 - 17-05-2016
up to me guts in nuts... love it
RE: my peugeot 306 meridian 1.9 td project - alex76 - 28-05-2016
I am looking for a phase 3 front bumper for my motor there is not a great deal on the interweb any ideas please
RE: my peugeot 306 meridian 1.9 td project - Magenta Sunset - 28-05-2016
(17-05-2016, 02:33 PM)alex76 Wrote: up to me guts in nuts... love it
I like to use a piece of hardboard to lie on
RE: my peugeot 306 meridian 1.9 td project - alex76 - 25-08-2016
a update of how she is looking now
brought the bumper of ebay was fairly damaged the three brackets on the bottom snapped off so made some makeshift ones first go at spraying and happy days
RE: my peugeot 306 meridian 1.9 td project - JTaylor2005 - 25-08-2016
Good to see a car gradually getting more and more restored
RE: my peugeot 306 meridian 1.9 td project - alex76 - 26-08-2016
(25-08-2016, 04:00 PM)JTaylor2005 Wrote: Good to see a car gradually getting more and more restored
cheers mate yeah coming on nice
RE: my peugeot 306 meridian 1.9 td project - alex76 - 05-09-2016
oh dear after turning the pug round to start on the back I found this looks like i am saving up for a mig.
not giving up one the old gal just means she in not going back on the road just yet
RE: my peugeot 306 meridian 1.9 td project - Eeyore - 05-09-2016
thats not the worst ive seen. im sure it will be fine!
RE: my peugeot 306 meridian 1.9 td project - alex76 - 06-09-2016
all stripped out and ready to start again let the works commence
RE: my peugeot 306 meridian 1.9 td project - alex76 - 10-01-2017
Bit of an update earth bracket for rear lights made and seatbelt bracket just got to make the panel then welding happy days after buying a nice priced mig and help from local boys at local steel fabs for some nice sheet steel also nice price
RE: my peugeot 306 meridian 1.9 td project - alex76 - 30-03-2017
bit of a update the pug has been patched