306oc - Peugeot 306 Owners Club & Forum
Yamaha R6 throttle bodies + MS ECU. - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Parts (https://www.306oc.co.uk/forum/forumdisplay.php?fid=25)
+--- Thread: Yamaha R6 throttle bodies + MS ECU. (/showthread.php?tid=33287)



Yamaha R6 throttle bodies + MS ECU. - Rippthrough - 15-02-2016

As above, selling my R6 'bodies, had originally intended to use these on my TU3 engine but now I have a V6 I don't think 4 throttle bodies will work very well [Image: wink.gif]

They're from a 2005 model R6, 38mm diameter (so you should be good up to 180-200bhp or so), and they have built in constant velocity sliders like a CV carb, which keeps the airspeed up over the injectors at lower rpms, or with smaller engines, so you get better bottom end and midrange torque + mpg/emissions.
They come with the injectors (updated 4 hole spray pattern versions), fuel pressure regulator, the throttle position sensor, MAP sensor, and all the wiring plugs to connect to them, they also have a remote idle speed adjustment cable that you can pop somewhere easy to get to for fine tuning, the cold/fast idle valve is there too.
Condition-wise they're perfect, they only did delivery milage to the dealer in Louth that I bought them from - where they were removed as the bike was to be converted for racing. There's not a mark or spec of dirt on them, they've been wrapped up and dry stored since.

£75

Pictures to follow.


RE: Yamaha R6 throttle bodies. - wannagoride1 - 15-02-2016

Interesting. Pics please


RE: Yamaha R6 throttle bodies. - Rippthrough - 22-02-2016

Pics:

[Image: R6TB-1.jpg]

[Image: R6TB-2.jpg]

[Image: R6TB-3.jpg]

[Image: R6TB-4.jpg]

And as mentioned I have the other half of the connectors/wiring tails for TPS, injectors, etc.


RE: Yamaha R6 throttle bodies. - Rippthrough - 24-02-2016

Provisionally sold.

I will have the Megaquirt ECU (MS1 v3 Extra) I was going to run these with up for sale shortly though, comes with a stimulator for bench testing the ECU, cables for PC connection, new loom connector, etc. £200


RE: Yamaha R6 throttle bodies + MS ECU. - Rippthrough - 25-02-2016

Pics:

[Image: ECU2.jpg]

[Image: ECU1.jpg]


RE: Yamaha R6 throttle bodies + MS ECU. - Strikeforce - 24-06-2016

Did the bodies sell?


RE: Yamaha R6 throttle bodies + MS ECU. - Rippthrough - 25-06-2016

Yes, afraid so, went a while ago. Still have the ECU atm