+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: DW10 HDi section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=10)
+--- Thread: HP Fuel Pump FPR Bolts (/showthread.php?tid=33176)
HP Fuel Pump FPR Bolts - BiG K - 31-01-2016
Does anyone have a broken HP fuel pump and willing to send out the bolts from the FPR?
or if not, the size of the bolts so I can grab some replacements? (Both of mine have corroded and the head's are FXXXED!) Ta in advance!
RE: HP Fuel Pump FPR Bolts - tigerstyle - 26-05-2016
Same request on bolt size please
Think it's M6 currently?
RE: HP Fuel Pump FPR Bolts - BiG K - 26-05-2016
I ended up buying a whole fuel pump for the two bolts haha. I'll get it measure up tomorrow for you!
RE: HP Fuel Pump FPR Bolts - tigerstyle - 27-05-2016
M6*15mm
RE: HP Fuel Pump FPR Bolts - BiG K - 27-05-2016
M6 * 15mm is correct. Has a T30 Torx head.
RE: HP Fuel Pump FPR Bolts - pug306driver - 27-05-2016
whats the pitch please??
RE: HP Fuel Pump FPR Bolts - BiG K - 27-05-2016
No idea how to measure pitch, I think it's standard? I've included a photo if that helps.
RE: HP Fuel Pump FPR Bolts - welshpug - 27-05-2016
Probably 1.0mm pitch, use the links below to find them
RE: HP Fuel Pump FPR Bolts - tigerstyle - 27-05-2016
(27-05-2016, 07:49 PM)welshpug Wrote: Probably 1.0mm pitch, use the links below to find them
And yeah it's 1mm
AFAIK not listed, servicebox is not all that.
I looked yesterday, does have the o-ring specs though.
RE: HP Fuel Pump FPR Bolts - BiG K - 27-05-2016
The O-rings are cheap enough to buy....if your dealer will get them in. Some O rings are supplied in packs of 5, some in 4 and some in 3... they were being a bit arsey with me when I went to go buy the O rings.
RE: HP Fuel Pump FPR Bolts - pug306driver - 28-05-2016
cool, thanks, fore armed etc., looks as if a 10mm hex head will fit??
RE: HP Fuel Pump FPR Bolts - Poodle - 29-05-2016
You might find you have clearance issues getting a socket over it, being so close to the solenoid body as they are.
RE: HP Fuel Pump FPR Bolts - tigerstyle - 29-05-2016
Yeah, hex head is a no go. Bolt won't even fit let alone the socket.
In a pinch you could use a 30mm long bolt and a 15mm spacer, but not recommended.
RE: HP Fuel Pump FPR Bolts - pug306driver - 30-05-2016
thanks, will go down the allan bolt route