+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: General (https://www.306oc.co.uk/forum/forumdisplay.php?fid=6)
+--- Forum: The Couch (https://www.306oc.co.uk/forum/forumdisplay.php?fid=7)
+--- Thread: ooh shit! (/showthread.php?tid=33001)
Pages:
1
2
ooh shit! - cully - 11-01-2016
Big do do!
im screwwed well the pipe is!
its carrying oxygen so ive just managed to shut down a whole ward!
RE: ooh shit! - Magenta Sunset - 11-01-2016
remember, i'ts all repairable - -
RE: ooh shit! - bashbarnard - 11-01-2016
Oh shit
RE: ooh shit! - tigerstyle - 11-01-2016
Shit design? I wouldn't worry about that!
No capping, no warning signs, you coulda died mate! go get some compo!
Also, wtf were you doing? Where's the wallplug? Or pilot hole?
RE: ooh shit! - silverzx - 11-01-2016
Looks air tight to me.
Drive on.
RE: ooh shit! - Niall - 11-01-2016
PTFE on a self tapper, bang it in and jobs a good'un
I have definitely not repaired a CH pipe with this method before that I drilled through
RE: ooh shit! - tigerstyle - 11-01-2016
For normal plaster/brick/block work?
Modern drills aye? Big power!
RE: ooh shit! - roland rat - 11-01-2016
Haha i hope your better at working in cars than hanging pictures up
RE: ooh shit! - Piggy - 11-01-2016
Bwhahahaha
RE: ooh shit! - toseland - 11-01-2016
duct tape! sorted
RE: ooh shit! - Toms306 - 11-01-2016
Its fine, there's plenty of oxygen about anyway!
RE: ooh shit! - cully - 11-01-2016
the day was going so well!
was given the job of refixing the over bed light that had been ripped from the fixings
std practice is to fix a back board once the conduit box is broken beyond repair
someone else had already measured up and had the boards made
there was no indication the pipes were there as the outlet is to the right beside the curtain the wrong side the nurse call panel
anyway tiz done now
you wouldnt believe the proscess of getting that pipe dead and repaired needless to say its going to cost a few ££
RE: ooh shit! - 1616six - 11-01-2016
Surely working in that environment you'd have a pipe/wiring detector?
RE: ooh shit! - Niall - 11-01-2016
(11-01-2016, 06:04 PM)JJ0063 Wrote: Surely working in that environment you'd have a pipe/wiring detector?
They are pretty crap to be honest!
Paul, why couldn't you replace the conduit box? Or was it fitted with pots behind the plaster no chance of changing?
In that case i just redrill holes in the back of the box and thread them then just use longer brass screws to fix in. Job done!
RE: ooh shit! - Danny Wideboy - 11-01-2016
Erm.
Nobody gonna mention gripfill?
Yes I am aware hindsight is everything.
RE: ooh shit! - WiNgNuTz - 11-01-2016
Gripfill is cheap rubbish....Sticks like Sh*t is where it's at! That stuff is bloody awesome!
RE: ooh shit! - Niall - 11-01-2016
You're buying fake stuff then i reckon Danglenuts. Gripfill is awesome stuff! Its also great for filling gaps and cracks lol
RE: ooh shit! - WiNgNuTz - 11-01-2016
Meh, I still use it if I need it in bulk, but for the majority of my job where gripfill would apply, I use sticks like sh*t instead.
RE: ooh shit! - Danny Wideboy - 11-01-2016
(11-01-2016, 06:47 PM)Niall Wrote: You're buying fake stuff then i reckon Danglenuts. Gripfill is awesome stuff! Its also great for filling gaps and cracks lol
Agreed, as long as you don't get that non solvent bollocks it's good as gold.
RE: ooh shit! - cully - 11-01-2016
conduit box it terminated with MICC
we need to fix to the block-work as we have had the angle lamps pull sections of plasterboard off the walls when we have used gripfill
RE: ooh shit! - Niall - 11-01-2016
Ah I see. MICC is wonderful stuff....
RE: ooh shit! - Danny Wideboy - 11-01-2016
Dry lining is such a shit building method.
Why not plaster the blockwork and have a solid wall?
As a bricklayer and plasterer I find it ridiculous that it is even still a thing.
RE: ooh shit! - Niall - 11-01-2016
(11-01-2016, 07:55 PM)Danny Wideboy Wrote: Dry lining is such a shit building method.
Why not plaster the blockwork and have a solid wall?
As a bricklayer and plasterer I find it ridiculous that it is even still a thing.
100% agreed with this. I hate new builds with a passion for this reason. Especially when you get pikeys these days rush things so much but providing it all looks ok on the surface its fine.
I went through a 230v cable a while back. Could see where it was leaving the panel so you would think they would follow the safe zones right? No. It went at a 45 degree angle behind the board!
RE: ooh shit! - Danny Wideboy - 11-01-2016
(11-01-2016, 07:58 PM)Niall Wrote:(11-01-2016, 07:55 PM)pid=\573196 Wrote:. It went at a 45 degree angle behind the board!
Naughty, to say the least.
RE: ooh shit! - tigerstyle - 11-01-2016
that Hospital looks like a dirty hole anyway... the grime!
RE: ooh shit! - Dum-Dum - 11-01-2016
(11-01-2016, 02:49 PM)Niall Wrote: PTFE on a self tapper, bang it in and jobs a good'un
I have definitely not repaired a CH pipe with this method before that I drilled through
I've gotta sat I saw the pic and straight up legit thought of this as an appropriate repair. Get it tight in there and bolt cropper the rest of the screw off and hide the evidence with plaster.
No evidence, no witnesses, no crime.
RE: ooh shit! - 7057sam - 12-01-2016
Paul you really screwed up....
RE: ooh shit! - Redordead89 - 12-01-2016
(11-01-2016, 11:54 PM)Dum-Dum Wrote:(11-01-2016, 02:49 PM)Niall Wrote: PTFE on a self tapper, bang it in and jobs a good'un
I have definitely not repaired a CH pipe with this method before that I drilled through
I've gotta sat I saw the pic and straight up legit thought of this as an appropriate repair. Get it tight in there and bolt cropper the rest of the screw off and hide the evidence with plaster.
No evidence, no witnesses, no crime.
Hmm pinch of salt time FFS! Fk that sht better off with 2t engine issues lol
(12-01-2016, 12:41 AM)7057sam Wrote: Paul you really screwed up....
Yes he did lol
RE: ooh shit! - Niall - 12-01-2016
(12-01-2016, 12:41 AM)7057sam Wrote: Paul you really screwed up....
Pipe down Sam he's probably embarrassed about the situation...
RE: ooh shit! - 1616six - 12-01-2016
So that was an oxygen pipe?
Breathtaking.