+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: General (https://www.306oc.co.uk/forum/forumdisplay.php?fid=6)
+--- Forum: The Couch (https://www.306oc.co.uk/forum/forumdisplay.php?fid=7)
+--- Thread: Need parts collected between Nottingham / Portsmouth? (/showthread.php?tid=32671)
Need parts collected between Nottingham / Portsmouth? - Dazecoop - 02-12-2015
Anyone want anything collected/dropped off anywhere between Nottingham & Portsmouth area? I'm doing this trip on Friday, have most of the morning to do nothing so could detour to help someone out dropping/collecting parts if they want?
On a related note, GTI-6 rear calipers - anyone have any? Somewhere in-between these 2 locations is even better, haha.
RE: Need parts collected between Nottingham / Portsmouth? - Eeyore - 02-12-2015
all rear calipers are the same. Theyre either drums or disks.
RE: Need parts collected between Nottingham / Portsmouth? - Dazecoop - 02-12-2015
(02-12-2015, 01:29 PM)Eeyore Wrote: all rear calipers are the same. Theyre either drums or disks.Ah, handy to know. Thanks!
RE: Need parts collected between Nottingham / Portsmouth? - Matt - 03-12-2015
Possibly actually. How bigs the vechike your doing the trip in?
RE: Need parts collected between Nottingham / Portsmouth? - Dazecoop - 03-12-2015
(03-12-2015, 01:46 AM)Matt Wrote: Possibly actually. How bigs the vechike your doing the trip in?306 3 door
RE: Need parts collected between Nottingham / Portsmouth? - Matt - 03-12-2015
Hmmm might fit. I'll get back to you!
RE: Need parts collected between Nottingham / Portsmouth? - Ben_w - 03-12-2015
Got 3 rear calipers in Leicester. One is fine, other needs a rebuild but you can use the parts off the third to do that if needed. £30 for all 3?
RE: Need parts collected between Nottingham / Portsmouth? - Dazecoop - 03-12-2015
(03-12-2015, 03:49 PM)Ben_w Wrote: Got 3 rear calipers in Leicester. One is fine, other needs a rebuild but you can use the parts off the third to do that if needed. £30 for all 3?I think I've sourced some calipers now, but if it falls through I'll give you a shout! Thanks!