![]() |
Ph3 clocks in Ph1? - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16) +--- Forum: XU Petrol Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=17) +--- Thread: Ph3 clocks in Ph1? (/showthread.php?tid=31993) |
Ph3 clocks in Ph1? - Nathan1305 - 23-09-2015 Can Ph3 gti6 clocks be used in a Ph1 gti6? Need to see if my clocks are at fault RE: Ph3 clocks in Ph1? - Frosty - 23-09-2015 Im pretty sure the plugs are different. Ph2 and 3 are the same but ph1 is different, think they have about 4/5 plugs on them RE: Ph3 clocks in Ph1? - Piggy - 23-09-2015 Nah, ph1 has different plugs and not sure but isnt ph1 speed drive cable? I know the xud is RE: Ph3 clocks in Ph1? - 1616six - 23-09-2015 Got a feeling they used both but I might be wrong, being a later Ph1 I guess it's more likely to be electronic but it had crossed my mind whilst I read this having my morning poo. RE: Ph3 clocks in Ph1? - Mattcheese31 - 23-09-2015 Cable drive is only the really early ones K and maybe L reg, plugs are different anyway I think ![]() RE: Ph3 clocks in Ph1? - Stef205 - 23-09-2015 according to autodata phase 1 has 2 plugs and phase 2/3 has 3 plugs could be wrong tho RE: Ph3 clocks in Ph1? - Nathan1305 - 23-09-2015 Yeah it's electronic speedo. My DT is phase 2. Could that work just to test if the fuel and temp work? Ph3 clocks in Ph1? - Frosty - 23-09-2015 My s16 was cable drive and that was a M reg RE: Ph3 clocks in Ph1? - Mattcheese31 - 23-09-2015 (23-09-2015, 09:34 AM)Frosty Wrote: My s16 was cable drive and that was a M reg yeah that will be the last ones no doubt ![]() RE: Ph3 clocks in Ph1? - Toms306 - 23-09-2015 (23-09-2015, 08:18 AM)Stef205 Wrote: according to autodata phase 1 has 2 plugs and phase 2/3 has 3 plugs could be wrong tho Phase 3 only has 2 plugs iirc. One yellow, one blue, both at the top. RE: Ph3 clocks in Ph1? - Nathan1305 - 23-09-2015 I know my DT has 4 plugs like my 6' RE: Ph3 clocks in Ph1? - Toms306 - 23-09-2015 Well as you have both there and know the plugs are the same, just try it lol?? Whats the worst that can happen! ![]() RE: Ph3 clocks in Ph1? - Nathan1305 - 23-09-2015 (23-09-2015, 09:59 AM)Toms306 Wrote: Well as you have both there and know the plugs are the same, just try it lol?? Whats the worst that can happen! Yeah screw it haha it's just to test fuel and water temp RE: Ph3 clocks in Ph1? - Matt-Rallye - 23-09-2015 Got some ph2 clocks here if you want some nathan ![]() RE: Ph3 clocks in Ph1? - Nathan1305 - 23-09-2015 (23-09-2015, 11:26 AM)Matt-Rallye Wrote: Got some ph2 clocks here if you want some nathan Do they have 4 plugs? RE: Ph3 clocks in Ph1? - Matt-Rallye - 23-09-2015 Unsure as they are still in the scrap 6 currently. should be out later ![]() how does it work with the digital mileage on ph2/3's and analogue on ph1? EDIT: on a side note all your plastics and belts are out & ready ![]() RE: Ph3 clocks in Ph1? - maxzy - 23-09-2015 PH2 & 3 can be directly swap without any problems (Yellow & Blue). But Ph 1 as I can remember plug are difference. RE: Ph3 clocks in Ph1? - Nathan1305 - 23-09-2015 (23-09-2015, 12:56 PM)Matt-Rallye Wrote: Unsure as they are still in the scrap 6 currently. should be out later Awesome thanks mate ![]() RE: Ph3 clocks in Ph1? - RetroPug - 23-09-2015 They have different gauges on them as well. Have you examined the engine loom under the front bumper? RE: Ph3 clocks in Ph1? - Nathan1305 - 23-09-2015 (23-09-2015, 06:48 PM)RetroPug Wrote: They have different gauges on them as well. I'll be taking a look at it Friday when I'm off again |