Rear numberplate bulbs - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22) +--- Forum: Electrics (https://www.306oc.co.uk/forum/forumdisplay.php?fid=23) +--- Thread: Rear numberplate bulbs (/showthread.php?tid=3190) |
Rear numberplate bulbs - ginge191 - 03-05-2012 Anyone know the bulbs for the rear tail lights; a combination of rain/derv/dirt its a pita seeing the plate through these petty lights. preferably some LED bulbs, rather than the poor standard bulbs... assuming these are ok to use, don't get too hot etc? Also, changing the bulbs - is it simply, popping the cover off from the outside, and replacing that way... or can you pull it up from inside the boot? Rear numberplate bulbs - Matt - 03-05-2012 Pop the cover, bulb out, new bulb in done and they are same bulbs as side lights Re: Rear numberplate bulbs - ginge191 - 03-05-2012 Matt Wrote:Pop the cover, bulb out, new bulb in done and they are same bulbs as side lights you know the bulb code? 501 W5W? Re: Rear numberplate bulbs - Mattcheese31 - 03-05-2012 really? . . . . .a thread for replacing a bulb . . . . . Re: Rear numberplate bulbs - nauest - 03-05-2012 Yuh I have LED rear bulbs, decided to change the whole assembly with it though as the lens cover clips seemed very prone to breaking and 2 where broken already. I will ask SRowel what bulbs they where. The lens comes off from outside and bulbs push in, the assembly comes off from inside. Re: Rear numberplate bulbs - nauest - 03-05-2012 http://www.ebay.co.uk/itm/2X-4-LED-HID-XENON-WHITE-501-T10-W5W-SIDELIGHT-BULBS-/130529434691?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item1e64291c43 These are what I have got, they are pretty good, cheaper than the all round ones, you dot need all round light in your tailgate. Rear numberplate bulbs - Matt - 03-05-2012 ginge191 Wrote:Matt Wrote:Pop the cover, bulb out, new bulb in done and they are same bulbs as side lights That will be it, if going for led then I would go for smd LEDs. They are really bright are are cracking in the dark Re: Rear numberplate bulbs - mark_airey - 03-05-2012 Matt Wrote:That will be it, if going for led then I would go for smd LEDs. They are really bright are are cracking in the dark The SMD ones also get really hot and can melt the solder if they are cheap as I found out Re: Rear numberplate bulbs - nauest - 03-05-2012 Yuh the ones I posted are regular incased LEDs, plenty of light output. Don't get hot. If LEDs are enclosed and get hot they discolor and fair really quickly too. Re: Rear numberplate bulbs - ginge191 - 03-05-2012 mark_airey Wrote:Matt Wrote:That will be it, if going for led then I would go for smd LEDs. They are really bright are are cracking in the dark this was what i was wondering... Also, at cheesey matt, the thread is actually for the bulb "type" not a "how to" Re: Rear numberplate bulbs - ginge191 - 03-05-2012 nauest Wrote:http://www.ebay.co.uk/itm/2X-4-LED-HID-XENON-WHITE-501-T10-W5W-SIDELIGHT-BULBS-/130529434691?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item1e64291c43 and thanks, just ordered a set top man ! Re: Rear numberplate bulbs - nauest - 03-05-2012 Cool, no worries, also if they don't work straight off take them out and turn them round! They are polarity sensitive unlike normal bulbs, so don't panic until you have tried them both ways round. If they don't work after that then they are dud, but I guess there is every chance for less than £1.50 Re: Rear numberplate bulbs - Mattcheese31 - 03-05-2012 Also, at cheesey matt, the thread is actually for the bulb "type" not a "how to" cough cough ok then . . "Also, changing the bulbs - is it simply, popping the cover off from the outside, and replacing that way... or can you pull it up from inside the boot?" Re: Rear numberplate bulbs - ginge191 - 03-05-2012 Mattcheese31 Wrote:"Also, changing the bulbs - is it simply, popping the cover off from the outside, and replacing that way... or can you pull it up from inside the boot?" Which is correct.... I wasn't sure if there was an alternative Re: Rear numberplate bulbs - Mattcheese31 - 04-05-2012 ginge191 Wrote:how many ways can you change a bulb? . . . .sorry Ginge i'm ripping you for this and there's nowt' you can do about it . .Mattcheese31 Wrote:"Also, changing the bulbs - is it simply, popping the cover off from the outside, and replacing that way... or can you pull it up from inside the boot?" Re: Rear numberplate bulbs - ginge191 - 04-05-2012 Mattcheese31 Wrote:how many ways can you change a bulb? . . . .sorry Ginge i'm ripping you for this and there's nowt' you can do about it . . dick head Re: Rear numberplate bulbs - Mattcheese31 - 04-05-2012 ginge191 Wrote:if it can wait until FCS i'll help you change your bulbs . . .Mattcheese31 Wrote:how many ways can you change a bulb? . . . .sorry Ginge i'm ripping you for this and there's nowt' you can do about it . . Re: Rear numberplate bulbs - 4WayDiablo - 04-05-2012 Mattcheese31 Wrote:ginge191 Wrote:dick headif it can wait until FCS i'll help you change your bulbs . . . Fcs camping bulb changing session yo! Re: Rear numberplate bulbs - ginge191 - 04-05-2012 Mattcheese31 Wrote:if it can wait until FCS i'll help you change your bulbs . . . absoloute tosser you know what, i THINK i'll be able to do it myself... the MBC on the other hand, if you have smaller hands than me, crack on! :dance: Re: Rear numberplate bulbs - Mattcheese31 - 04-05-2012 Fetch the bulb changing gloves will ya Phill? . . . . . Re: Rear numberplate bulbs - Mattcheese31 - 04-05-2012 ginge191 Wrote:what turbo you got mate?Mattcheese31 Wrote:if it can wait until FCS i'll help you change your bulbs . . . Re: Rear numberplate bulbs - 4WayDiablo - 04-05-2012 Mattcheese31 Wrote:Fetch the bulb changing gloves will ya Phill? . . . . .They're remarkably similar to the "other" gloves I'll be bringing Re: Rear numberplate bulbs - ginge191 - 04-05-2012 Mattcheese31 Wrote:what turbo you got mate? K14 i believe... Dan! was saying it has a metal pipe as upposed to a rubber pipe... Re: Rear numberplate bulbs - 4WayDiablo - 04-05-2012 Its not hard you can still just snip them Re: Rear numberplate bulbs - Mattcheese31 - 04-05-2012 ginge191 Wrote:yeah same as mine then . . i still haven't got round to fitting mine, gonna put her on the lift to do it soon, be muchos easier methinks . .Mattcheese31 Wrote:what turbo you got mate? Re: Rear numberplate bulbs - ginge191 - 04-05-2012 4WayDiablo Wrote:Its not hard you can still just snip them ..is not a word im fond of, "snipping" anything i get scared electrics/pipes/foreskin etc... Re: Rear numberplate bulbs - 4WayDiablo - 04-05-2012 Man up? Re: Rear numberplate bulbs - ginge191 - 04-05-2012 No. |