Higher lift camplate in ve pump. - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16) +--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11) +--- Thread: Higher lift camplate in ve pump. (/showthread.php?tid=31859) |
Higher lift camplate in ve pump. - bashbarnard - 10-09-2015 So ive got a few pumps sitting about but the latest one ive stripped to re seal and put on mine appears to have a higher lift camplate in! Didnt think it was a good idea to up the injection on an idi. Anyone had any experience on this. Is it a case of more pressure less duration? Genuinely no idea. RE: Higher lift camplate in ve pump. - Jonny81191 - 10-09-2015 The higher lift camplates come from direct injection pumps, obviously with the shorter injection window it needs a bigger, shorter injection. Not sure what yours is off, it could have been modified for an m-tdi conversion or something. Stick up a picture of it l? RE: Higher lift camplate in ve pump. - zx_volcane - 10-09-2015 Two types of cam plate found in the standard 9mm iirc matched to two different heads - same lift and duration but physical differences in size mean you can't mix them without snapping plungers or it not working. The DI camplate in a transit pump for example has a higher lift but much shorter duration which is no good for the longer injection burn of IDI You'll hear about the VW boys putting a higher lift camplate in their pumps, but they are all DI If on the other hand you deffo have an IDI camplate that has a higher lift and same duration as standard, then get it whacked in and you'll have potential for getting more fuel in same injection window. RE: Higher lift camplate in ve pump. - bashbarnard - 10-09-2015 Fair enough. Ive got a few di camplates for a future project i have in mind so ill compare today when i get chance. The pump was on an xud. RE: Higher lift camplate in ve pump. - Piggy - 10-09-2015 This pump was broke though wasnt it Bash? I rekon they swapped the 11mm head with camplate and thus broke it! RE: Higher lift camplate in ve pump. - Ruan - 10-09-2015 Should be a code written on the camplate itself... What is it? RE: Higher lift camplate in ve pump. - bashbarnard - 10-09-2015 600 then 8595 looks the same as my di one though thats de633 440 |