+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: DW10 HDi section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=10)
+--- Thread: Correct filter housing? (/showthread.php?tid=31063)
Correct filter housing? - JTaylor2005 - 02-07-2015
Hi all.
Wanna try and get my fuel filter changed and fpr cleaned out next weekend. Need to get new seals for the fpr? I presume from peugeot. Also need a new bosch filter presumably from peugeot as well?
Finally I need to get a new housing as I don't think I can put much more force on undoing mine without cracking the plastic unfortunatly :/
Does this look like the right one for our cars?
This one?
Thanks
Jack
RE: Correct filter housing? - tigerstyle - 02-07-2015
More like this: http://www.ebay.co.uk/itm/Fuel-Filter-Housing-Peugeot-206-306-307-406-607-806-Partner-Expert/301552089910?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D30773%26meid%3Df5dcafea88ef422cbaa72f3ad16e28d5%26pid%3D100005%26rk%3D4%26rkt%3D6%26sd%3D181269942936&rt=nc
RE: Correct filter housing? - JTaylor2005 - 02-07-2015
Ahh dammit I was looking at the one for the siemens fuel system haha. Good job I asked
Cheers 
I just thought it may have been a slight design change as the one I have are known to be a pain haha
RE: Correct filter housing? - mr_fish - 03-07-2015
The one in the 1st post isn't just for siemens, I have it on my DW10 206 and seen it on a C5 DW12
Would say its just a newer design of housing
(just saying
)
RE: Correct filter housing? - C2K - 03-07-2015
I got one of those housing surplus to requirement. Pm me if interested.
RE: Correct filter housing? - Magenta Sunset - 21-09-2015
my 2p'th tip,
rather than using a big spanner to undo the top, I use a webbing strap-wrench.
once it's pulled tight against the cap, it rotates fairly well.
likewise for doing up again.
RE: Correct filter housing? - JTaylor2005 - 21-09-2015
Ahhh sorry C2K I hadn't seen that reply before I bought one off eBay. Done the job tbf. And yeah it was just not budging. Eventually did it with a spanner but I did it in the vice and didn't care if I broke it as I already had a replacement haha.