Sam's 2.0 16v VNT ph1 rep HDi - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20) +--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3) +--- Thread: Sam's 2.0 16v VNT ph1 rep HDi (/showthread.php?tid=31030) |
Sam's 2.0 16v VNT ph1 rep HDi - Sambarker - 29-06-2015 Ok, so another project I've just started Cheap tax ph3 hdi dturbo in Diablo £250 with a full tank of diesel, spares or repair due to a knackered alternator and horrendous front end lacquer peel Alternator change in services round the corner.... And she's sweet! So....why did I buy it? Answer really is that the 305 simply cannot handle the power of the engine that is in it now and suspension/brakes etc mean it can't be driven to its full potential So....the motor from the 305 will be going into this and the stock motor from this will be going in the 305 and getting a manageable tune up. But it's not very retro I hear you say! True! But it's a hdi so the engine swap will be a piece of piss, plus it's cheap tax, plus because it's a ph3 you get all the goodies and the shell isn't rotten. Cue the ph1 conversion So it's now got a full ph1 front end with twin optics, ph1 dturbo side repeaters, and a ph1 tailgate. Still required are ph1 rear bumper with the black strip, and a pair of ph1 wings really so the early style side repeaters and hockey sticks will fit properly. It's also going to get coilovers, upgraded anti roll bars front and back, gti6 brakes and a front mount. It will be staying on cyclones and will be aiming to retain the oem+ ph1 look No point getting all the spraying done until all the engine/suspension/brakes are done as not to risk damaging any paint! Comments/suggestions welcome! Oh and it will be getting a numberplate change to compliment it's ph1 look RE: Ph? hdi project - bashbarnard - 29-06-2015 Phase 1s are the best anyway. I think that its a fair idea to put the hdi in the older car. That's what I would do. Good luck with it. RE: Ph? hdi project - Frosty - 29-06-2015 I like the sound of this a lot, good work Sam RE: Ph? hdi project - Mattcheese31 - 29-06-2015 Was that slam panel ok then Sam? Maybe i was tripping, you can have back bumper off Sigma but towbar cutout and bigger exhaust cutout RE: Ph? hdi project - Piggy - 29-06-2015 shweet idea this! When I thought there were no more original ideas... the dervmafia surprise us again! Shweeet! RE: Ph? hdi project - 1616six - 29-06-2015 Does this mean the 305 may be up for grabs? /hawk RE: Ph? hdi project - HDi--Power - 29-06-2015 Please not a phase 1 conversion RE: Ph? hdi project - Mattcheese31 - 29-06-2015 (29-06-2015, 08:13 PM)JJ0063 Wrote: Does this mean the 305 may be up for grabs? /hawk Read the original post JJ lol RE: Ph? hdi project - 1616six - 29-06-2015 (29-06-2015, 09:42 PM)Mattcheese31 Wrote:(29-06-2015, 08:13 PM)JJ0063 Wrote: Does this mean the 305 may be up for grabs? /hawk I did lol, just wondered if one would be going or if he was keeping both Ph? hdi project - Sambarker - 29-06-2015 Can't let go of the 305! RE: Ph? hdi project - 7057sam - 29-06-2015 Bargain buy mate RE: Ph? hdi project - Matt - 29-06-2015 Bargain! Looks like it's gunna be an epic project as usual! Ph? hdi project - Sambarker - 07-07-2015 Another step on the ph1 transformation - period numberplate RE: Ph? hdi project - mr_fish - 07-07-2015 Need to change the rear badges next RE: Ph? hdi project - THE_Liam - 07-07-2015 Looks good mate, the phase 1 was always the best looking. Ph? hdi project - Sambarker - 07-07-2015 (07-07-2015, 03:36 PM)mr_fish Wrote: Need to change the rear badges next On the list [emoji106]? RE: Ph? hdi project - 1616six - 07-07-2015 I have a Dturbo badge from a Ph1 if it's any use, retro. I know this is a HDI, but at least it's authentic diesel badgeness. RE: Ph? hdi project - Piggy - 07-07-2015 (07-07-2015, 03:59 PM)JJ0063 Wrote: I have a Dturbo badge from a Ph1 if it's any use, retro. yeah but they DID do a HDi dturbo! so not totally inaccurate Ph? hdi project - Sambarker - 08-07-2015 I have a ph1 dturbo badge, and yes it is a true dturbo! RE: Ph? hdi project - rd070707 - 01-09-2015 Are changing the wings to ph1 necessary? Whats the difference in them? RE: Ph? hdi project - RetroPug - 01-09-2015 (01-09-2015, 10:52 AM)rd070707 Wrote: Are changing the wings to ph1 necessary? Whats the difference in them? Slightly different shape around the edge of the headlight to accommodate the Ph.1 indicators I think. RE: Ph? hdi project - Sambarker - 02-09-2015 Yeah as above and also the holes in the wings are too big for the early ph1 side repeaters which I want to use RE: Ph? hdi project - procta - 02-09-2015 looking great! nice idea converting a phase3 into a phase1 RE: Ph? hdi project - Redordead89 - 18-11-2015 Yeah mate love this! RE: Ph? hdi project - Dazecoop - 18-11-2015 Looks awesome, Ph1 is so much nicer I think!! RE: Ph? hdi project - Eeyore - 18-11-2015 So what colour are you going to spray it? RE: Ph? hdi project - Mattcheese31 - 18-11-2015 (18-11-2015, 05:32 PM)Eeyore Wrote: So what colour are you going to spray it? why? Do you think it needs spraying? Lol RE: Ph? hdi project - WiNgNuTz - 18-11-2015 Multi coloured cars are all the rage at the moment, get with the times Rowell! RE: Ph? hdi project - Sambarker - 19-11-2015 Will be going Diablo RE: Ph? hdi project - dr_jekyll - 19-11-2015 Did this two my old 5 door hdi, never got it sprayed though and just looked a mess |