+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: DW10 HDi section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=10)
+--- Thread: Leak near EGR (/showthread.php?tid=30894)
Leak near EGR - Dreijers - 16-06-2015
I have mysterious leak from place where exhaust gases go to EGR valve(I think).
EGR is not blanked, maybe this is the right time.
What could be reason for this?
Should I be concerned at all, because engine has >250k miles on it! and probably has not been rebuilt.
Thanks in advance!
RE: Leak near EGR - tigerstyle - 16-06-2015
super common problem bud!
time to de- EGR!
RE: Leak near EGR - Poodle - 16-06-2015
That's your inlet elbow, not the egr, just needs a new gasket. Having trouble finding them for sale, so may need to cut one out of gasket paper. Lots of people say cereal boxes are fine, but having tried it a few times and each time achieved the same messy, not-actually-fixed end result i wouldn't bother.
RE: Leak near EGR - JTaylor2005 - 16-06-2015
I had to get my gasket from a Peugeot dealership. Got a pack of 10 for £11 or something like that can't rember. Looking at ur location in latvia that could make things difficult.
RE: Leak near EGR - Iceman299 - 16-06-2015
That's actually a pretty minor leak compared to most i've seen, including mine when i first bought it.
RE: Leak near EGR - Paul_13 - 16-06-2015
Peugeot is the easiest option for the gasket
In this country any way
RE: Leak near EGR - titch - 16-06-2015
Yeah new gasket from the dealer, part number 0348 N6
RE: Leak near EGR - HDi--Power - 16-06-2015
Dirko and a gasket will ensure no leaks, don't use the gasket dry or it will leak again
RE: Leak near EGR - Dreijers - 17-06-2015
Time to call local dealer!
RE: Leak near EGR - Iceman299 - 17-06-2015
I used a couple (dealer recommendation) along with high temp sealant and it's holding up so far
RE: Leak near EGR - pro_steve - 17-06-2015
clear silicone seems to be holding on mine
RE: Leak near EGR - highwayman306 - 18-06-2015
Nice steve
i used a folder divider and high temp silicon (copper stuff) so far so good