Exhaust Design? - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16) +--- Forum: DW10 HDi section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=10) +--- Thread: Exhaust Design? (/showthread.php?tid=30624) |
Exhaust Design? - JTaylor2005 - 28-05-2015 Hi all, Finally looking at getting a nice mandrel bent system made up. Got a well reviewed place lined up. Quick question really. What set-up of exhaust will not be too loud but will sound a bit deeper and louder? Would you think I would need 2 or 1 resonator or free flowing silencer etc? Thanks Jack RE: Exhaust Design? - toseland - 28-05-2015 i have.. straight through from the manifold in stainless with a single powerflow backbox.. its quite reserved (sounds nice) until you open it up then it roars.. other option to the single backbox seems to be midbox and straight to tailpipe., and please dont say your "well reviewed place" is Longlife.. for the love of god (they will charge you 3 times the price) RE: Exhaust Design? - JTaylor2005 - 28-05-2015 Okay that sounds good then cheers for that. And nahh its not. Place up in Manchester called Cybox. They sell loads of custom exhausts on eBay as kits but you can get full custom ones made there. RE: Exhaust Design? - toseland - 28-05-2015 i was quoted about 250 for a FULL system cat back, from the local stainless exhaust place.. just for comparison RE: Exhaust Design? - JTaylor2005 - 28-05-2015 Cheers mate RE: Exhaust Design? - Iceman299 - 28-05-2015 Or if you didnt want to pay for stainless, can get a hoffman straight through mid pipe for £45 and a decat for £45 and keep a standard backbox. Just another cheaper option I might go for the mid pipe in the future. Shame i just replaced mine for a standard section 6 months ago RE: Exhaust Design? - Connor - 28-05-2015 I paid £180 for my 2.5" turbo back straight through stainless system and sounds lovely (to me anyway) few people on here can vouch for that RE: Exhaust Design? - mr_fish - 29-05-2015 (28-05-2015, 09:17 PM)Connor Wrote: I paid £180 for my 2.5" turbo back straight through stainless system and sounds lovely (to me anyway) few people on here can vouch for that Oh we all know when Connor's turbo is on song. Exhaust Design? - connorp - 29-05-2015 I've just got a £50 3.5" back box from eBay, cut and welded a bit of pipe to fit it, and the hangers and it sounds mad, it can be a bit too loud at times but it loves a nice long tunnel!! RE: Exhaust Design? - JTaylor2005 - 01-06-2015 I can't be bothered to get one custom built. What do you reckon would be the cheapest possible way to remove the cat and get a nice free flowing back box? I'm thinking take the cat off and cut and weld a straight bit of pipe through and then for the back box just get a cheap one off eBay and bolt it on haha? RE: Exhaust Design? - Iceman299 - 01-06-2015 (01-06-2015, 03:39 PM)JTaylor2005 Wrote: I can't be bothered to get one custom built. What do you reckon would be the cheapest possible way to remove the cat and get a nice free flowing back box? Get a straight through mid pipe. Use mid silencer you've taken off to do the backbox conversion a few people have done RE: Exhaust Design? - Jonny81191 - 02-06-2015 Have you still not sorted an exhaust yet? RE: Exhaust Design? - JTaylor2005 - 02-06-2015 Nope. Money has been all over the place atm lol. Just gonna get an eBay decat and get a cheap side exit made up at a place just round corner from me haha RE: Exhaust Design? - Jonny81191 - 02-06-2015 I thought you were concerned about legality? RE: Exhaust Design? - JTaylor2005 - 02-06-2015 It's fine haha. |