+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Interior, Exterior, ICE (https://www.306oc.co.uk/forum/forumdisplay.php?fid=12)
+--- Thread: Ph1/ph2/3 window regulators (/showthread.php?tid=3052)
Ph1/ph2/3 window regulators - Jenkosowls - 26-04-2012
I have a phase 1 3 door with electric windows the window reg is screwed on the drivers side I orded a green window slider to fix and turns out I have a white one which the whole slider is different.
Trying to find a phase 1 window regulator is difficult and was wondering if the phase 2/3 ones will be ok as long as I get the clips etc that hold the window to the slider?
Re: Ph1/ph2/3 window regulators - spike2002 - 26-04-2012
I think the plugs for the motor are different on the phase 1 to the phase 2/3
Re: Ph1/ph2/3 window regulators - spike2002 - 26-04-2012
I have a phase 1 window motor out of a 5 door if they are the same as 3door?
Re: Ph1/ph2/3 window regulators - Tom - 26-04-2012
R45_ODV Wrote:I have a phase 1 window motor out of a 5 door if they are the same as 3door?No, doors shorter on a 5door so the motor doesnt reach its mounting points.
At OP you need to keep your eye out for someone breaking a phase one.. or buy new ones for 60quid a side if your keen lol
Ph1/ph2/3 window regulators - Parksy87 - 05-05-2012
Where abouts you from jenko?
Re: Ph1/ph2/3 window regulators - Jenkosowls - 11-05-2012
all sorted now got one of a member thank god i can open it now!
Parksy87 im from near rotherham
Ph1/ph2/3 window regulators - Parksy87 - 12-05-2012
Ah ok dude have the full setup at mine white runner, reg and im sure iv got the plastic washer to hold the window. Never mind
