+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Interior, Exterior, ICE (https://www.306oc.co.uk/forum/forumdisplay.php?fid=12)
+--- Thread: Fitting a aftermarket steering wheel (/showthread.php?tid=30282)
Fitting a aftermarket steering wheel - Danaidh - 01-05-2015
Hey everyone,
I know am new here and this has more then likely been covered loads of times
Am looking to change my airbag wheel to a aftermarket one as I want to to get rid of the airbag issues and also try and cure the airbag light issues which has managed to fail me 3 mots. But that's a story for a different time.
Anyone done this and if so have you got any pictures of it?
RE: Fitting a aftermarket steering wheel - bashbarnard - 01-05-2015
Loads and loads of people have. Have a look through the project threads and see. I believe zx-volcane is running a replica omp one. Looks good. I run a 205 steering wheel if you like the oem look with a bit of dish. Also look at gti6 wheels as they are standard but leather which is a nice touch.
RE: Fitting a aftermarket steering wheel - kentiiboii - 01-05-2015
If your air bag is on it'll be the connections under the seats.
Your best off taking the plug off and soldering them together for better connection.
If you wanna put steering wheel on then you need to buy a resistor so your airbag light doesn't flash.
Cully sells them on ebay for the airbag.
I have a omp deep dish replica in my gti6.
RE: Fitting a aftermarket steering wheel - Danaidh - 01-05-2015
I will try soldering the cables in the morning for a better connection, as for the steering wheel am thinking of a nice wheel with a little bit of dish but not too much. Seen a few I like, I will try and find this guy on ebay. Am guessing any 306 boss will fit the d turbo estate?