Mi16 rods - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16) +--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11) +--- Thread: Mi16 rods (/showthread.php?tid=29991) |
Mi16 rods - Deutz_1 - 07-04-2015 Does anyone on here know if mi16 con rods will fit an xud? Dimensions of the mi16 rods are as follows: Center to center length 143mm Big end diameter 53.69mm Small end diameter 22mm Big end width 22.45mm Small end width 22.45mm RE: Mi16 rods - zx_volcane - 07-04-2015 nope they won't fit RE: Mi16 rods - Ruan - 07-04-2015 No chance, small end is smaller, crank journal width is smaller on the Mi16 rods. RE: Mi16 rods - welshpug - 07-04-2015 if you have them spare I'd be interested RE: Mi16 rods - Deutz_1 - 07-04-2015 (07-04-2015, 10:08 AM)zx_volcane Wrote: nope they won't fit Is it you that does the group buys for the xud rods? RE: Mi16 rods - zx_volcane - 08-04-2015 (07-04-2015, 11:10 PM)Deutz_1 Wrote:(07-04-2015, 10:08 AM)zx_volcane Wrote: nope they won't fit I have done a few sets of forged rods recently, yes RE: Mi16 rods - Deutz_1 - 08-04-2015 (08-04-2015, 08:43 AM)zx_volcane Wrote:(07-04-2015, 11:10 PM)Deutz_1 Wrote:(07-04-2015, 10:08 AM)zx_volcane Wrote: nope they won't fit Are you going to be doing another soon? RE: Mi16 rods - zx_volcane - 09-04-2015 Would need another two people to come in on it to get the ball rolling again on those rods. RE: Mi16 rods - Deutz_1 - 09-04-2015 I'll see if I can get another couple of people for it and let you know Mi16 rods - zx_volcane - 09-04-2015 Get a project thread up for your build and some pics, be nice to see what you have planned ..etc RE: Mi16 rods - Deutz_1 - 09-04-2015 (09-04-2015, 04:57 PM)zx_volcane Wrote: Get a project thread up for your build and some pics, be nice to see what you have planned ..etc I maybe will some time in the future, got everything sitting here for about 220hp except the con rods RE: Mi16 rods - 205dtub - 12-04-2015 I would put my name down as a definite buyer if a group buy was put together! RE: Mi16 rods - Deutz_1 - 24-04-2015 Gonna do this group buy then? |