+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Suspension, Transmission, Handling & Braking (https://www.306oc.co.uk/forum/forumdisplay.php?fid=19)
+--- Thread: Is my beam getting tired? (/showthread.php?tid=29721)
Is my beam getting tired? - philpemberton94 - 16-03-2015
My rear beam is lower on one side than the other, its not lowered on the back, but one side looks standard (as it should) the other side looks like it been lowered 30mm! There's no camber at all but is this the first stage of it letting go?
RE: Is my beam getting tired? - Frosty - 16-03-2015
Usually 1 side does seem to sit a bit lower than the other but not as much as 30mm
RE: Is my beam getting tired? - welshpug - 16-03-2015
they should sit the same.
RE: Is my beam getting tired? - Stef205 - 16-03-2015
should be the same each side ive ever seen one drop on one side.
RE: Is my beam getting tired? - WiNgNuTz - 16-03-2015
Yeah, sounds a little odd to me, have you got any pics of it sat on level ground from both sides?
RE: Is my beam getting tired? - jannelevenrot - 17-03-2015
I've heard of torsion bars getting tired and letting go giving the same result.
Does it spring like it should?
RE: Is my beam getting tired? - philpemberton94 - 17-03-2015
Will get a few after work
RE: Is my beam getting tired? - Stef205 - 17-03-2015
torsion bars can sag and bend but it wont effect the height as far as 30mm