Crank/Flywheel sensor - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16) +--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11) +--- Thread: Crank/Flywheel sensor (/showthread.php?tid=29625)

Crank/Flywheel sensor - Martin306 - 10-03-2015 Recently I have acquired one of these: My Question is, which two pins are the coil? There's 3 pins, numbered 1,2 and 3 (I would assume it's pin 1 and 2) obviously my loom only has 2 wires as it's a TUD The story. Changed my flywheel from a TUD fly (7Kg) to a TU5J4 flywheel (5.6Kg). The TUD crank sensor on the diesel only picks up one notch per rev, but the J4 fly has like 100 or something I didn't really count them.  So the tacho sits at 6k constantly. There's a hole in the back of the block looking at the back of the flywheel, designed for a crank sensor (it's a 20mm hole with an M6 threaded hole right next to it) Basically I want to fit this sensor  RE: Crank/Flywheel sensor - Martin306 - 10-03-2015 Fixed this now. How do I close my own thread? lol