Eddy's Red Rallye - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20) +--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3) +--- Thread: Eddy's Red Rallye (/showthread.php?tid=29341) |
Eddy's Red Rallye - eddy_gti6 - 21-02-2015 Yes here we go again! Yet another eddy project! :lmao Well as most of you know i picked up my rallye last night. It needed a water pump as it had been over heated but decided i would pull the engine out and do the head gasket to be safe and check the head too. Been busy this week working on a mates rallye so thought since i put a bit time into his i would do the same with mine. Plan is to pull the engine out,pressure wash the engine bay and clean up the patches where the paint has started flaking off. Am not going to go into a load of boring detail but the engine is ready to lift out tomorrow morning as its now time to get ready to go to top gear live in newcastle. Heres the car anyway RE: Eddy's Red Rallye - Lita-Marie - 21-02-2015 Nice.... So what other plans do u have...... Besides engine?? RE: Eddy's Red Rallye - Toms306 - 21-02-2015 Ah, that's Matt's one isn't it? Looks good tbf! RE: Eddy's Red Rallye - eddy_gti6 - 21-02-2015 My old one i use to own about 3 year ago buy yeah matt had it RE: Eddy's Red Rallye - eddy_gti6 - 22-02-2015 Well thats the engine out. I will strip that tomorrow S its been crap weather today, soaked right through but most of that was off the pressure washer :lol cleaned up the engine bay a little. Quite pleased with how well it has come out to be honest, was expecting to find a load of crappy bits what was going to need painting ect... but its not too bad really. Got new head gasket, bolts and timing belt to pick up tomorrow then i can make a start on fixing the engine and hopefully have it back in tomorrow and back on all 4 wheels then its ready for its MOT. (21-02-2015, 05:32 PM)Lita-Marie Wrote: Nice.... So what other plans do u have...... Besides engine?? Sorry missed this post yesterday. Not really made any plans just yet. I have a set of black pro race 3s what will be going on and lower it a little but other than that i have no plans just yet, just want to gwt it running and on the road 1st RE: Eddy's Red Rallye - eddy_gti6 - 22-02-2015 Woop just going through my tool box and found the group A fork bush i had on the nile 6. And a couple of photos here of my mates white rallye im doing a little work on at the minute too RE: Eddy's Red Rallye - 7057sam - 22-02-2015 Yeah boy ! Can you please actually keep this RE: Eddy's Red Rallye - eddy_gti6 - 22-02-2015 Here is the cause of the over heated engine! (22-02-2015, 07:27 PM)7057sam Wrote: Yeah boy ! I will try haha RE: Eddy's Red Rallye - Eeyore - 22-02-2015 ahhh so many rallyes! RE: Eddy's Red Rallye - eddy_gti6 - 22-02-2015 Thats not the last of them. My mate with the white one im working on, his brother has a black one and another mate of mine who lives 5mins away also has a red rallye RE: Eddy's Red Rallye - eddy_gti6 - 23-02-2015 Now that better From this To this Got the engine back in, pulled the head off today and checked it with a straight edge and and all seemed good put a new head gasket on, just went for a fibre fai one as was easy and saved waiting to get a mls one. New head bolts and water pump gone on so just hope its all ok. Dark now but got my light out to get the shafts and exhaust back on and hopefully get the front end on too RE: Eddy's Red Rallye - 7057sam - 24-02-2015 Nice one mate Get the engine painted up once you now it a good en RE: Eddy's Red Rallye - eddy_gti6 - 24-02-2015 Yeah i will but that can wait. Just want it up and running for now RE: Eddy's Red Rallye - Lita-Marie - 25-02-2015 (22-02-2015, 05:04 PM)eddy_gti6 Wrote: Well thats the engine out. I will strip that tomorrow S its been crap weather today, soaked right through but most of that was off the pressure washer :lol cleaned up the engine bay a little. Quite pleased with how well it has come out to be honest, was expecting to find a load of crappy bits what was going to need painting ect... but its not too bad really. What springs and shocks u using? RE: Eddy's Red Rallye - eddy_gti6 - 25-02-2015 Just standard for the time being RE: Eddy's Red Rallye - ozonehostile - 25-02-2015 Been keeping up to date on Facebook with this, you'd better keep it after the last few years pattern of epic gti6's then instant regret after breaking haha RE: Eddy's Red Rallye - Piggy - 25-02-2015 Nice! Best car, best model, best colour RE: Eddy's Red Rallye - eddy_gti6 - 25-02-2015 Haha i will try keep this one. Well thats the car all back together, cars only running on 3 cylinders, has a f*cked coil pack so need to hunt out my box of spares and replace that. Fitted a nissens rad to replace the crappy black steel one and fitted my pro race 3s and 2 of the cyclones have punctures. Just about ready to go for its MOT now. RE: Eddy's Red Rallye - mr_fish - 26-02-2015 no messing around here. tidy example! RE: Eddy's Red Rallye - eddy_gti6 - 27-02-2015 Sorted all o the little bits and bobs out today and just dropped the car in for its MOT. Should be on the road In an hour or so RE: Eddy's Red Rallye - eddy_gti6 - 27-02-2015 Well thats the rallye through its MOT, didnt put a foot wrong RE: Eddy's Red Rallye - 7057sam - 27-02-2015 Well done mate The td's look sweet needs some black masks and lows RE: Eddy's Red Rallye - joshed - 01-03-2015 Love this never seen a rallye on the road Going to look out for these now RE: Eddy's Red Rallye - eddy_gti6 - 02-03-2015 (27-02-2015, 11:20 PM)7057sam Wrote: Well done mate Thanks sam. Yes black masks and just some 45mm springs are the next job. No rush tho, the car drives mint as it is like. Want to try keep it road worthy haha RE: Eddy's Red Rallye - eddy_gti6 - 06-03-2015 Finally got some time to day yo do some of the crappy jobs on the rallye today! Had to pull the facia off as some previous owner must have been f*cking of with the heater controls and some of the cables were off the back so i couldnt change the blowers or the temperature. Had a right chow on getting the cables back where the go but i got there in the end with a shit load of cuts and scratches on my hands. Also changed all the bulbs while i had it to bits as they didnt work either. Been on all week sorting a mates diablo GTi6 out to sell but all is well and sold it wednesday. RE: Eddy's Red Rallye - eddy_gti6 - 15-03-2015 Well my crystals finaly turned up saturday so gave me something to do masking them up and fitting them. Today i got rid of the ABS. 1 thing i dont like is ABS its just pointless and more weight so just done a quick bend the standard brake pipes and fit them into the T piece till i can be bothered to make up some new like. I do have a set of braided front lines from the master cylinder to the flexis but dont know if i want to use them or just make up all new copped lines. Picked up a set of 45mm eibach lowering springs yesterday so will get them fitted this week along with lowering the rear axle. RE: Eddy's Red Rallye - eddy_gti6 - 29-03-2015 Finally got round to lowering the rallye a little. Still with crap in the back but last pic is after i emptied the boot RE: Eddy's Red Rallye - ozonehostile - 29-03-2015 That looks soooo good RE: Eddy's Red Rallye - eddy_gti6 - 29-03-2015 Thanks mate. Thinking bout selling the wheels and getting soms 16s and fitting my bucket seats RE: Eddy's Red Rallye - 7057sam - 29-03-2015 Keep the 15's mate,nice cheap rubber And definitely get the seats in,track car in the making |