+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XU Petrol Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=17)
+--- Thread: itb fuel pressure (/showthread.php?tid=29318)
itb fuel pressure - grantpipe - 19-02-2015
Hi there. I'm having problems withe the fueling on jenvey itbs I had them removed from the car for cleaning and relocated the power steering for an air filter but now it won't start.
When turning over looking down the inlets the fuel is just spitting in slowly I thought it should be a fine high pressure mist any ideas as to what could cause this?
It's got an aftermarket fpr so was gonna go back to standard but don't know yet
Any help would be great thanks
RE: itb fuel pressure - Niall - 20-02-2015
Fuel pressure ok? Got the fuel lines on the FPR the correct way?
RE: itb fuel pressure - welshpug - 20-02-2015
get a fixed FPR, adjustable ones are nothing but trouble.
then have it mapped properly.
RE: itb fuel pressure - grantpipe - 04-03-2015
Yup adjustable ones defo out the window.
anybody know a decent fixed pressure regulator and where to get it.
RE: itb fuel pressure - miles - 04-03-2015
3 or 3.5 bar, type depends on your setup
RE: itb fuel pressure - welshpug - 05-03-2015
There's one on your original fuel rail.
I've got a Satchell Engineering holder for mine though not using it at the mo as my TB manifold retains the original fuel rail.
RE: itb fuel pressure - grantpipe - 11-03-2015
Where will I get a housing for my standard gti6 regulator for push on type rubber hosing?