+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: General (https://www.306oc.co.uk/forum/forumdisplay.php?fid=6)
+--- Forum: Newbies (https://www.306oc.co.uk/forum/forumdisplay.php?fid=24)
+--- Thread: Newbie in Kent (/showthread.php?tid=29150)
Newbie in Kent - Bosch - 08-02-2015
Hi all, soon to be picking up my 2.0 hdi 306. Going from an MG ZR 160 to one of these should be interesting and definitely more economical lol.
The only mod on the car so far is a powerflow exhaust other than black gti 6 wheels. Never been a great fan of French cars after owning a T reg Saxo vtr but this is very clean and looking forward to driving a diesel again
RE: Newbie in Kent - WiNgNuTz - 08-02-2015
Welcome to the forum.
Get some pics up when you can, and maybe a project thread if you've got many plans for the car?
Newbie in Kent - Bosch - 08-02-2015
I'll be doing the odd mod to it but I've got a kiddy on the way and the missus doesn't want me to have a mega modded car like before haha. Main plan is a remap and possibly a decat. How much louder would. Decat mate the car? The powerflow that's on it I'm not sure how far forward it goes lol but gives a nice subtle noise
RE: Newbie in Kent - 7057sam - 08-02-2015
Hello and welcome along
RE: Newbie in Kent - Herby7 - 09-02-2015
Welcome
As said pics would be good.
RE: Newbie in Kent - PUGNUT_XS - 09-02-2015
Hi and welcome.
Glad to see another person from kent has joined
RE: Newbie in Kent - todd1983 - 09-02-2015
Welcome, I'm new here too. Where abouts in Kent are you, I'm in greenhithe/stone
Newbie in Kent - Bosch - 10-02-2015
I'm in Maidstone at the minute but moving ashford way soon mate
RE: Newbie in Kent - PUGNUT_XS - 11-02-2015
I am in Rochester
RE: Newbie in Kent - son of a beesting - 11-02-2015
Welcome
Newbie in Kent - Bosch - 11-02-2015
Thanks everyone
Newbie in Kent - Bosch - 28-02-2015
Picking the pug up tomorrow
pics to follow
RE: Newbie in Kent - Pebbles167 - 28-02-2015
Welcome
Be sure to post up some pictures when you can!
RE: Newbie in Kent - Stu83 - 01-03-2015
Hi Welcome
Newbie in Kent - Bosch - 01-03-2015
Picked up the pug
drives beautifully, one small niggle is the speedo stops working intermittently but will investigate further at work tomorrow. Will take some pictures tomorrow aswell
RE: Newbie in Kent - Niall - 02-03-2015
If the speedo intermittently stops, it just needs a new speed sensor (VSS). Common fault on these
Newbie in Kent - Bosch - 02-03-2015
Take it that just screws into the gearbox with a 3 pun connector in? Or something similar?
RE: Newbie in Kent - Niall - 02-03-2015
Correct. Its a bit of a pain to get to. White sensor on the diff housing. 3 pin plug and a single M6 bolt. Simple if you can get your hand down there with a small ratchet.
Newbie in Kent - Bosch - 02-03-2015
I've got little hands should be ok lol
Here's a few badly taken pictures from after I finished work
[attachment=21970]
[attachment=21971]
[attachment=21972]
Photography is not my forte
RE: Newbie in Kent - mcvite - 03-03-2015
Welcome to the forum,in joy your new toy!
Newbie in Kent - Bosch - 03-03-2015
I will try
hopefully get a remap within the next couple of weeks