+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Parts (https://www.306oc.co.uk/forum/forumdisplay.php?fid=25)
+--- Thread: Stef's beam builds (/showthread.php?tid=28869)
Stef's beam builds - Stef205 - 22-01-2015
Hi all,
Id thought id offer the members on here my budgeted beam builds. These will work on the basis of a supplied beam, they will be stripped, inspected, then rebuilt with new parts. This will include new bearings, seals, trailing arm shafts, arb bushes and seals. The tubes will be well greased with lithium grease as this does not eat into seals like general grease. They will have a quick de rust of any flaking material then painted in black paint. I can lower it to a required height other wise i will build it to the height it was received at.
I will be doing this at £220 Im purely offering this as i know some people do not want to spend big and this purely gives a choice. This will be available on drum and disc 306/205/309 axles, other model axles please pm me.
Thanks Stef
RE: Stef's budget beam builds - 7057sam - 22-01-2015
How much do the courier's charge ??
RE: Stef's budget beam builds - Stef205 - 23-01-2015
£30 via parcel monkey using DX couriers. I used them with the last axle I sent to Scotland.
RE: Stef's budget beam builds - Mattcheese31 - 23-01-2015
Is that an all in price? Just postage to yours on top or postage there and back?
RE: Stef's budget beam builds - Stef205 - 23-01-2015
It would be postage on top for both ways.
RE: Stef's budget beam builds - Dangti6 - 23-01-2015
If I supplied you a beam to refurbished and the tube was knackered, is there a cost for replacing the tube?
RE: Stef's budget beam builds - Stef205 - 23-01-2015
Naturally I would not accept a seized beam, I would inspect the axle before its stripped. Generally I charge £40 for a good s/h tube. Also it is very hard to tell the inside condition of a tube until it is stripped.
RE: Stef's budget beam builds - Mattcheese31 - 23-01-2015
(23-01-2015, 11:19 AM)Stef205 Wrote: It would be postage on top for both ways.
so really its £280 then
RE: Stef's budget beam builds - Stef205 - 23-01-2015
Unless you can find a cheaper alternative, I was only using my previous sent axle as an example.
RE: Stef's budget beam builds - Connor - 23-01-2015
Where are you in the south west?
RE: Stef's budget beam builds - Stef205 - 23-01-2015
Lyme Regis
RE: Stef's budget beam builds - Niall - 23-01-2015
Ill take one of these around about April time
RE: Stef's budget beam builds - Stef205 - 23-01-2015
I've already cut you a good enough deal Mr on yours!
RE: Stef's budget beam builds - cully - 23-01-2015
if your collecting it Niall i expect a visit!
RE: Stef's budget beam builds - Niall - 23-01-2015
(23-01-2015, 09:29 PM)cully Wrote: if your collecting it Niall i expect a visit!
Only if that kettles boiling
RE: Stef's budget beam builds - cully - 23-01-2015
(23-01-2015, 09:35 PM)Niall Wrote:(23-01-2015, 09:29 PM)cully Wrote: if your collecting it Niall i expect a visit!
Only if that kettles boiling
always is
RE: Stef's budget beam builds - Stef205 - 06-02-2015
Just bumping this up, few people have taken advantage of this.
RE: Stef's budget beam builds - RetroPug - 18-02-2015
Might take you up on this in the next couple of months!
RE: Stef's budget beam builds - Stef205 - 18-02-2015
no problem give me a pm when your ready
RE: Stef's budget beam builds - Nathan1305 - 27-02-2015
Collected my beam today for my 106 and really impressed with it, Stef does great work on these
highly recommended
RE: Stef's budget beam builds - Stef205 - 27-02-2015
Thanks nathan glad your happy with it
RE: Stef's budget beam builds - LewisG - 01-03-2015
Ive got my old estate beam in the garage, with serious camber which was why I changed it, its been sitting for a year though, What can you do with it?
RE: Stef's budget beam builds - Stef205 - 01-03-2015
Providing it hasnt nackard the tube then i can do what ever you require me to do.
RE: Stef's budget beam builds - WiNgNuTz - 21-03-2015
Just as a matter of curiosity, what sort of turn around time are we looking? Just wondering, as my beam is showing signs of camber, and could benefit from a refurb, but haven't got a spare to replace it with.
Alternatively, would you consider some sort of exchange arrangement?
RE: Stef's budget beam builds - Stef205 - 21-03-2015
ive a gti spec beam here minus the arb that i could do on a exchange basis if you like but would need the same spec in return. No more than a week, as i order parts as and when i need them.
RE: Stef's budget beam builds - WiNgNuTz - 21-03-2015
Ok, well I don't have that kind of money to spend on a beam refurb right at the moment, but at least I know it COULD be a possibility. Might try and lay my hands on another beam to send off though rather than having to rely on you having the one I need.
RE: Stef's budget beam builds - Stef205 - 21-03-2015
no problem, like i say ive one here i can build and swap it for yours
RE: Stef's budget beam builds - Stef205 - 08-05-2015
just bumping this up for anyone thats interested.
I can also offer my top rebuilds these are on a exchange basis, they are fully inspected before and after strip down, heavily de rusted and painted in oem colouring. New bearing, seals, cups, shafts, arb seals, bushes and new bolts including shock bolts. Set to your required height and well greased and copper greased used where needed.
![[Image: 03BCC07A-A83A-48CF-8BD3-39465A95C2AE_zpslesbko0t.jpg]](http://s10.photobucket.com/user/skyline_999/media/beams/03BCC07A-A83A-48CF-8BD3-39465A95C2AE_zpslesbko0t.jpg.html)
![[Image: 00864907-E95A-463D-8D58-98452FD11814_zpsl3tqbmty.jpg]](http://s10.photobucket.com/user/skyline_999/media/beams/00864907-E95A-463D-8D58-98452FD11814_zpsl3tqbmty.jpg.html)
For this service i offer discount to forum members at £280
Stef
RE: Stef's budget beam builds - bashbarnard - 08-05-2015
Well ill be after one end of summer I reckon. I'll have a chat with you at fcs when I meet you. Lo
RE: Stef's budget beam builds - Stef205 - 08-05-2015
Look forward to it