306oc - Peugeot 306 Owners Club & Forum
Breaking: Ph1 306 Bits, GT2052V, TD04L Kit, XUD GBoxes, Bits n Bobs. - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Parts (https://www.306oc.co.uk/forum/forumdisplay.php?fid=25)
+--- Thread: Breaking: Ph1 306 Bits, GT2052V, TD04L Kit, XUD GBoxes, Bits n Bobs. (/showthread.php?tid=28818)



Ph1 306 Bits, GT2052V, TD04L Kit, XUD GBoxes, Bits n Bobs. - silverzx - 19-01-2015

Anyone want to make me offers on any of this?

1x Upper glove box - SOLD.
1x Heater blower motor £5 collected / £10 posted.
1x Ph1 side skirts £40 collected / £50 posted.
1x Used valeo clutch £10 collected / £15 posted.
1x Used XUD valeo clutch & pressure plate £15 collected / £22 posted.
1x XUD fly wheel £5 collected / £12 posted.
1x Battery box £5 collected / £10 posted.
1x TMIC £5 collected / £10 posted.
1x Radiator hose
1x Alternator
2x Stalks FREE / £5 posted.
2x Set of wipers FREE / £5 posted.
1x Set of 205 XLD front brakes with discs/calipers £10 collected / £25 posted.
1x Side light £5 collected / £10 posted.
1x TD04L kit with braided line, plates and worn TD04L (direct fit kit) SOLD.
2x XUD gearbox £SOLD.
1x GT2052V (volvo fitment) £100 collected / £120 posted.


Ph1 306 Bits + Turbos - Frosty - 19-01-2015

Mikey b maybe after 1 of the top glove boxes


RE: Ph1 306 Bits + Turbos - mikey b - 20-01-2015

Yes I want one of the glove boxs please 


RE: Ph1 306 Bits + Turbos - Mac22 - 20-01-2015

Pmd mate


RE: Ph1 306 Bits + Turbos - silverzx - 20-01-2015

(20-01-2015, 10:26 AM)mikey b Wrote: Yes I want one of the glove boxs please 

£10'er posted sound ok mate?

I have two, you can have the nicer one. Smile

PM me for PayPal details.


RE: Ph1 306 Bits + Turbos - crumpy - 23-01-2015

How worn is the td04? Will it need a rebuild?


RE: Ph1 306 Bits + Turbos - bashbarnard - 23-01-2015

Have you by any chance got an indicator stalk?


Ph1 306 Bits + Turbos - td_dan - 23-01-2015

Pics of 2052 please, whats the condition? Any shaft play? Any idea of mileage of vehicle its off?


RE: Ph1 306 Bits + Turbos - silverzx - 23-01-2015

(23-01-2015, 09:17 AM)crumpy Wrote: How worn is the td04?  Will it need a rebuild?

If you were to run big boost probably want to just replace it for another used one, probably £40-70 off eBay for a decent TD04L. I ran it on my 205 and it didn't show signs of dying but has fair amount of play.

(23-01-2015, 09:41 AM)bashbarnard Wrote: Have you by any chance got an indicator stalk?

I think so, you want it? Will double check for you. If you just cover postage (say a £5'er) you can have it. You can have the other stalk as well if you want? Any other little bits you need?

(23-01-2015, 10:12 AM)td_dan Wrote: Pics of 2052 please, whats the condition? Any shaft play? Any idea of mileage of vehicle its off?

Will get some later, it's VGC. Minimal shaft play, Mark/MrFish can confirms it's VGC. Looking for about £90 for that one.

If it's a bit rich for you then fair enough, I'd rather keep it and make it a bolt on jobby to put on the shelf if it doesn't sell. Blush


RE: Ph1 306 Bits + Turbos - bashbarnard - 23-01-2015

Yeah I can cover that so long as its the right stalk. I'll have a look over the motor tonight and see if there is anything else. May need a brake compensator as well.


RE: Ph1 306 Bits + Turbos - silverzx - 23-01-2015

(23-01-2015, 11:25 AM)bashbarnard Wrote: Yeah I can cover that so long as its the right stalk. I'll have a look over the motor tonight and see if there is anything else. May need a brake compensator as well.

I'll grab pictures for you to be certain, I don't have I have a brake compensator unfortunately. Scrapped the car a while back. Dodgy


RE: Ph1 306 Bits + Turbos - bashbarnard - 23-01-2015

That's fine. Grab some pics and I can pay pal you the monies


RE: Ph1 306 Bits + Turbos - bashbarnard - 26-01-2015

Got the stalk then?


RE: Ph1 306 Bits + Turbos - deggerz - 27-01-2015

What colour are the side skirts mate? And 3 door or 5 door?


RE: Ph1 306 Bits + Turbos - daveylennon93 - 27-01-2015

How much for the tdo4 setup? Just interested really in the plates and line


Ph1 306 Bits + Turbos - silverzx - 28-01-2015

(23-01-2015, 12:10 PM)bashbarnard Wrote: That's fine. Grab some pics and I can pay pal you the monies

Only stalks I can find are these two:

1)
[Image: 13a6031f7b81ceb9fcd5183eb895a4c6.jpg]

[Image: 6dc2f91f7186ac52d7315c114ab827e5.jpg]

2)
[Image: 61f2dbfa4648f4246f3513f53d6b9e20.jpg]

[Image: 30d0dc017698087cdf67c34e65fb9c25.jpg]

(27-01-2015, 08:38 AM)deggerz Wrote: What colour are the side skirts mate? And 3 door or 5 door?

They're door Trim things (rub strips?) not side skirts.

And they're ph1 3 door.



Here's a few pics of the VNT too:

[Image: 845fdf625f7a92a72c8563b6663d5b3e.jpg]

[Image: 5a73f15ef02e87e7bbed93e052a40ce9.jpg]

[Image: c37ee0ea049d1f4f29314226341fc9a1.jpg]


RE: Ph1 306 Bits + Turbos - silverzx - 28-01-2015

BUMP - the cheaper things I will be binning if not wanted by anyone.

E.g. stalks, wiper arms, side lights, heater blower motor.


RE: Ph1 306 Bits, GT2052V, TD04L Kit, XUD GBoxes, Bits n Bobs. - silverzx - 30-01-2015

BUMP.


RE: Ph1 306 Bits, GT2052V, TD04L Kit, XUD GBoxes, Bits n Bobs. - daveylennon93 - 02-02-2015

Would you split the td04 stuff and just sell the adaptors and line?