+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: turbo oil feed (/showthread.php?tid=28813)
turbo oil feed - pugtk - 19-01-2015
After my initial shakedown of my 205 after its rebuild everything is going smooth enough.
However my turbo oil feed on the turbo side(2 bolts into the turbo) has started to leak once the engine is warm.
I had this pipe off when the engine was out(t2 turbo) I dont want to nip it uptoo much in case the bolts snap
Do these gaskets go often? or is it a cause of manning up and tighten the bolts.
I was thinking of using some durco and new bolts along with the gasket
RE: turbo oil feed - bashbarnard - 19-01-2015
Two bolts is the oil return. Not the feed. I think anyway. If it is renew the gasket man.
RE: turbo oil feed - Mattcheese31 - 19-01-2015
(19-01-2015, 08:09 PM)bashbarnard Wrote: Two bolts is the oil return. Not the feed. I think anyway. If it is renew the gasket man.
what he said . . .
RE: turbo oil feed - pugtk - 20-01-2015
Any links to these gaskets?
Thanks
Is that the return gasket inside the red box?
RE: turbo oil feed - ConorTRG - 20-01-2015
That's not it.
http://m.ebay.co.uk/itm/390633054393?nav=SEARCH
RE: turbo oil feed - pugtk - 20-01-2015
thanks for the link
Could you pm me your number conor, I missed your message about the helper springs.
I'm in no hurry I plan to finish the car around march, so I can wait until your next order.
Thanks