MOT fail - Brake Pipe Inadequately Clipped - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22) +--- Forum: Interior, Exterior, ICE (https://www.306oc.co.uk/forum/forumdisplay.php?fid=12) +--- Thread: MOT fail - Brake Pipe Inadequately Clipped (/showthread.php?tid=28690)

MOT fail - Brake Pipe Inadequately Clipped - tigerstyle - 11-01-2015 Had my HDi Estate fail an MOT the other day, one of the fails reads as: Nearside rear (to flexy clip missing) Brake pipe inadequately clipped [3.6.B.1] I haven't had it jacked up yet to look at the problem, but from googling the best  I can come up with is it's going to be the 'U' clips on the flexy, one might have rusted through? Anything else maybe so I can get the bits sorted?  Picture not mine but for reference:   RE: MOT fail - Brake Pipe Inadequately Clipped - swampy - 12-01-2015 The copper lines also run through clips on the body RE: MOT fail - Brake Pipe Inadequately Clipped - daddyfixit - 12-01-2015 on that pic were red flexi joins copper pipe, they pass through a black bracket---theres usually a horse-shoe clip to secure them . RE: MOT fail - Brake Pipe Inadequately Clipped - tigerstyle - 12-01-2015 thanks all, will follow the whole pipe from cylinder to master cylinder! RE: MOT fail - Brake Pipe Inadequately Clipped - Poodle - 13-01-2015 If it specifies flexi as per your op, then it'll be around the flexi.