GUIDE: Make a 306 Meridan/Gti6, 5 speed key-ring! - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22) +--- Forum: Guides (https://www.306oc.co.uk/forum/forumdisplay.php?fid=9) +--- Thread: GUIDE: Make a 306 Meridan/Gti6, 5 speed key-ring! (/showthread.php?tid=2863)

GUIDE: Make a 306 Meridan/Gti6, 5 speed key-ring! - nauest - 18-04-2012 OK Guys, just a bit of fun as it was raining, I was bored and as I recently changed my gear lever! The top of the knob popped out and we thought it could make a pretty neat Keyring, - First give it a polish and a clean, I used a pin to get the crap out of the numbers etc. - Then cut the excess plastic off carefully with wire cutters and sand the back surface down until it is smooth and the size you want it. - Fill the recess with a plastic resin, I used thermoset gel. This gives it some more weight and strength, + gives you something to mount the backing on. (You could mount a metal loop, chain or ring in the gel to attach the key ring) - Once the Gel has set, if you havent mounted something in it, drill a small hole then a large hole for the keyring to go through. (drill from the back through to stop it ruining the surface finish) UPDATE: A hot glue gun works a treat! Put it on a level surface and just fill it up and let it to cool for an hour. [attachment=3] - I then superglued it to some velvet, once glued carefully trimmed the excess off with some small scissors. You could stick any material on, some carbon effect or something, I think the ultimate would be a small Pug gel badge. - Added a bit of velvet to the hole and gave it a last clean and that was it. I think it looks quite neat, so if you have some old gear knobs and some time to kill! Cheers [attachment=2] [attachment=1] [attachment=0] GUIDE: Make a 306 Meridan/Gti6, 5 speed key-ring! - Matt - 18-04-2012 Good guide, but how do you get it out if it's stuck in, an not just popping out? Re: GUIDE: Make a 306 Meridan/Gti6, 5 speed key-ring! - nauest - 18-04-2012 Errmm, as mine didn't I have no idea! The knob should be hollow, if you can get a thin handled screwdriver and put the handle end inside the knob then give it a thump. Be careful though as the top is pretty thin. Take the leather off and take a look to see how it is stuck on? Be good to see how you get on, pics would be cool. Update: looking at it I think you will need to pull the leather off to get it out. Re: GUIDE: Make a 306 Meridan/Gti6, 5 speed key-ring! - Eeyore - 18-04-2012 When ned says we he means me and him! Yeh Ive got a spare knob so Ill have a go with that one! There were loads in the scrap yard! Who will be the first to do a gti6 knob? With the above post be caeful using tiny flat head screwdrivers to force stuff out. I once snapped one doing that and it almost took my eye out! Re: GUIDE: Make a 306 Meridan/Gti6, 5 speed key-ring! - samass - 19-04-2012 matt should just be able to pop it out with the appropriate amount of force! to the OP, pretty neat! i'd do mine, but my knobs pretty manky................................. Re: GUIDE: Make a 306 Meridan/Gti6, 5 speed key-ring! - Ed Doe - 19-04-2012 That's pretty cool; I'll have to nick fooby's gearknob insert next time im in his car Re: GUIDE: Make a 306 Meridan/Gti6, 5 speed key-ring! - nauest - 19-04-2012 Haha, cheers...! I wont be held responsible when people come back here asking about missing gear knobs though! Oh and big up the 106 1.5 Nad! Iv got one of those, massively underrated! Re: GUIDE: Make a 306 Meridan/Gti6, 5 speed key-ring! - Ed Doe - 19-04-2012 Haha, it's my daily hack; I forgot how expensive the '6 is in fuel so It's only the weekend car now! I do love it tbh; still very torn about whether to chop it in come mot time in october and get an e46 320d touring, or to keep it going another year. its just so cheap to run/insure it's a very hard decision!! Re: GUIDE: Make a 306 Meridan/Gti6, 5 speed key-ring! - samass - 19-04-2012 Ed, if you do want rid of the NAD wagon, i might want it! so give me a shout before you get rid pleeease and thankyou Re: GUIDE: Make a 306 Meridan/Gti6, 5 speed key-ring! - ben87 - 19-04-2012 thats a cool keyring fair play nice one Re: GUIDE: Make a 306 Meridan/Gti6, 5 speed key-ring! - nauest - 19-04-2012 My old NAD 106 is for sale! 114k on the clock, zest 2 in metallic red AND has a WATERPROOF sunroof Its was the phase 2 or 3 I think too? Uprates sounds, headlights, all practical stuff. Dirtcheap to run! 11 month tax and mot. Your welcome to some info if you like! I cant justify having 2 cars, luckily the HDI is sensible enough to use all the time. Re: GUIDE: Make a 306 Meridan/Gti6, 5 speed key-ring! - Eeyore - 22-04-2012 Ill give this a go tomorrow! RE: GUIDE: Make a 306 Meridan/Gti6, 5 speed key-ring! - Slam Wagon - 23-06-2012 Heres mine: Awesome idea! Love it. RE: GUIDE: Make a 306 Meridan/Gti6, 5 speed key-ring! - Eeyore - 25-06-2012 Ive done mine. Just got to find a scalpel blade and itll be finished