+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: 9/10/11mm? (/showthread.php?tid=28486)
9/10/11mm? - 306pc - 29-12-2014
Hi all,
I have a 9mm pump on at present fuelling a T25 hybrid. It goes well but I always have a feeling that a 10 or 11mm head will give me more. What are your opinions on what I should do. Stick or twist?
RE: 9/10/11mm? - ash23 - 29-12-2014
get a 11mm head in there it will make the word of difference. will wake the turbo nicely if set up decent
RE: 9/10/11mm? - 306pc - 08-01-2015
Yeah, going to go for it, just need to find one now.
RE: 9/10/11mm? - darrenjlobb - 08-01-2015
10mm....
RE: 9/10/11mm? - Jonny81191 - 08-01-2015
(08-01-2015, 08:30 AM)darrenjlobb Wrote: 10mm....
This. I'd always run 10mm on a daily driver purely because it's just so much more driveable than the 11mm.
RE: 9/10/11mm? - ash23 - 08-01-2015
Never had any issues daily driving with a 11mm pump suppose im use to it after a few years? 10/ 11mm will be a improvement any way
RE: 9/10/11mm? - darrenjlobb - 08-01-2015
10mm is perfect for 90% of XUD applications, esp VNT's / GT series blowers...
RE: 9/10/11mm? - Frosty - 08-01-2015
Team 10mm
RE: 9/10/11mm? - 306pc - 09-01-2015
Which cars do 10mm heads come from?
9/10/11mm? - Frosty - 10-01-2015
VAGs I think