+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Suspension, Transmission, Handling & Braking (https://www.306oc.co.uk/forum/forumdisplay.php?fid=19)
+--- Thread: Could I go with this wheel setup? (/showthread.php?tid=28408)
Could I go with this wheel setup? - JTaylor2005 - 21-12-2014
Hey all. Im a big fan of steel wheels tbf.
I was wondering if these would fit on my 306??
http://www.ebay.co.uk/itm/16-Wheel-SET-OF-4-for-Peugeot-Citroen-6-5J-4x108x65-1-ET26-/261708516268?pt=UK_CarParts_Acc_Wheels_tyres_Trims_Car_Rims_ET&hash=item3cef0b0bac
They have a fairly high offset so would I be right in thinking that if I fit a set of 10/20mm spacers they would be alright?
Also fitting 16's with wheels that are 215 wide would that be okay?
Thanks, Jack
RE: Could I go with this wheel setup? - Piggy - 21-12-2014
Std fitment iirc
205 be about as wide as you could go without arch rolling etc
RE: Could I go with this wheel setup? - Paul_13 - 21-12-2014
Bit pricey for steelies!
RE: Could I go with this wheel setup? - welshpug - 21-12-2014
Its a set of 4, and they're practically new, I don't know the guys selling the wheels but I do know of the guy that does the conversions to the vehicles these wheels come off!
RE: Could I go with this wheel setup? - JTaylor2005 - 22-12-2014
Well vortex wheels are 205 and wifh 20mm spacers they fit quite well.
would the offset on these cause issues if I fitted spacers?? I would only need like 15mm spacers to make the offset match cyclones if I have done my research correctly?
Cheers
RE: Could I go with this wheel setup? - welshpug - 22-12-2014
if the width is different you do not match the offset.
RE: Could I go with this wheel setup? - JTaylor2005 - 22-12-2014
But these wheels are 205 width arent they?? :S
RE: Could I go with this wheel setup? - welshpug - 22-12-2014
rim width is not measured in mm, its 6.5"
RE: Could I go with this wheel setup? - JTaylor2005 - 22-12-2014
Oh haha. So cyclones are 6j.
Couldn't I put spacers on to move them further out so they don't hit anything underneath the car like people do when fitting Vortex alloys?