+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: DW10 HDi section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=10)
+--- Thread: inlet temperature (/showthread.php?tid=28190)
inlet temperature - tuttyboy84 - 07-12-2014
Has anyone got any idea what temperature a stage 1+ boost reaches
RE: inlet temperature - DeeTurbo - 07-12-2014
That is a very good question, but I have no idea.
One of the mappers should know.
RE: inlet temperature - tuttyboy84 - 07-12-2014
Ive found some gasket paper thats up to 3mm thick and good too 120 degree's which im sure is more than good enough for an inlet but id like to be sure
RE: inlet temperature - DeeTurbo - 07-12-2014
Give it a go it might work but it's the pressure that might burst through as there is a long unsupported run at the top.
RE: inlet temperature - tuttyboy84 - 07-12-2014
Its rated to 8 bar so the pressure wont be an issue
RE: inlet temperature - DeeTurbo - 07-12-2014
Sounds good then.