306 rallye trackday project - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20) +--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3) +--- Thread: 306 rallye trackday project (/showthread.php?tid=28088) |
RE: 306 rallye trackday project - RetroPug - 27-10-2015 This is probably one of my favourite projects on the forum as the CF is all homebrew moulds. Can't wait to see this in action. RE: 306 rallye trackday project - twangy - 27-10-2015 (27-10-2015, 12:27 PM)RetroPug Wrote: This is probably one of my favourite projects on the forum as the CF is all homebrew moulds. Can't wait to see this in action. thanks very much , will let you no when its out on track , and hopefully will do some club days next year , theres still a bit to do before that eg mapping , and finishing paintwork and graphics , also after cams ,but will let you no as soon as out on track ,thanks wayne RE: 306 rallye trackday project - Midnightclub - 27-10-2015 Airbox looks awesome, reminds me quite a bit of the airbox on the maxi rally car RE: 306 rallye trackday project - twangy - 27-10-2015 (27-10-2015, 01:05 PM)Midnightclub Wrote: Airbox looks awesome, reminds me quite a bit of the airbox on the maxi rally car thanks mate RE: 306 rallye trackday project - insomaniac45 - 27-10-2015 those things are going to suck better than a turbo charged hoover, the air box look epic, good job. Just think of all that lovly cold air being pushed through the gap straight into your jenvys Are you running unfiltered? or will your at least put a pre screen on? RE: 306 rallye trackday project - twangy - 27-10-2015 (27-10-2015, 01:09 PM)insomaniac45 Wrote: those things are going to suck better than a turbo charged hoover, cheers mate , yes will be running a filter just haven't had time to order or fit , should get plenty of cold air to jenveys like you say RE: 306 rallye trackday project - Magenta Sunset - 27-10-2015 how do you get the CF to cure? RE: 306 rallye trackday project - twangy - 27-10-2015 (27-10-2015, 05:19 PM)Magenta Sunset Wrote: how do you get the CF to cure? hi m8 , its basically like doing fibre glassing , with resin RE: 306 rallye trackday project - insomaniac45 - 28-10-2015 only difference to CF to FG is your using Carbon Fiber matt as the medium its used alot in the RC plane world RE: 306 rallye trackday project - Magenta Sunset - 28-10-2015 reminds me. must make a start on dash binnacle sometime - - - RE: 306 rallye trackday project - twangy - 31-10-2015 finished air box and made and fitted filter as ramair supplied me with filter caging and filter foam for a bargain price of £15 next day delivery , and best of all enough to make a spare 1 , , total bargain RE: 306 rallye trackday project - twangy - 09-11-2015 finally got round to priming and painting carbon fibre door and lower quarter were rub strips removed , and started fitting graphics RE: 306 rallye trackday project - twangy - 26-11-2015 carbon n/s door all now fitted up , and made a start on dropping front cross member as am seam welding it so removed and started to grind down ready for welding RE: 306 rallye trackday project - DemonDriverDan - 26-11-2015 Can you post photos as you do the seam welding? I want to do it on mine when I get my welder sorted RE: 306 rallye trackday project - C2K - 26-11-2015 Look at my project thread Dan, I did it 5 years ago now. RE: 306 rallye trackday project - 205dtub - 27-11-2015 Nice build, I'll be following! RE: 306 rallye trackday project - twangy - 03-12-2015 seam welded subframe all painted and ready for refitting , so will refit over weekend RE: 306 rallye trackday project - twangy - 11-12-2015 while i had subframe stripped off, took some photos of rosejointed gear linkage that was made up RE: 306 rallye trackday project - twangy - 29-12-2015 big plans for new year for the 306 ,as have started collecting a few bits over the last month , engine wise have kent cams pt81 cams and vernier pulley ,to go in engine ,will get pockets put in pistons , then strate for mapping , have new spal fan , and new race loom getting made , also after vts rack , so quite a bit to get on with RE: 306 rallye trackday project - adam b - 29-12-2015 Get my pm about the airbox, Wayne? RE: 306 rallye trackday project - Blandy - 29-12-2015 Wow that airbox is awesome. Cracking project RE: 306 rallye trackday project - twangy - 30-12-2015 (29-12-2015, 10:47 PM)adam b Wrote: Get my pm about the airbox, Wayne?hi adam , yes did get pm about airbox ,but would not let reply , did try and message on the gti forum , i am going to try and make a load of item in new year mate , so will keep you posted (29-12-2015, 10:56 PM)Blandy Wrote: Wow that airbox is awesome. Cracking project thank mate RE: 306 rallye trackday project - Iaitoo - 30-12-2015 Custom work is insane! Fantastic. RE: 306 rallye trackday project - twangy - 30-12-2015 (30-12-2015, 09:40 AM)Iaitoo Wrote: Custom work is insane! Fantastic. thanks very much RE: 306 rallye trackday project - twangy - 08-01-2016 started stripping front end of car ,, as need engine out ready to go to engine builders , and why engine getting done can make new light weight race car loom and freshen up front end RE: 306 rallye trackday project - twangy - 10-01-2016 [took delivery of pt81 kent cams and vernier pulleys , ready for engine wich will be getting built in next month RE: 306 rallye trackday project - roland rat - 10-01-2016 Read the thread from the beginning and I have to say there's some awesome fabrication gone on in this build,well done! RE: 306 rallye trackday project - twangy - 11-01-2016 (10-01-2016, 10:29 PM)roland rat Wrote: Read the thread from the beginning and I have to say there's some awesome fabrication gone on in this build,well done! RE: 306 rallye trackday project - 7057sam - 12-01-2016 Looking really good mate What size cooler do you run Ive had to move up to a 19 row as the 16 wasn't really up to it. RE: 306 rallye trackday project - twangy - 12-01-2016 (12-01-2016, 12:57 AM)7057sam Wrote: Looking really good mate |