+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: 306 rallye trackday project (/showthread.php?tid=28088)
RE: 306 rallye trackday project - twangy - 16-11-2017
picked up box of front suspension upright for car , all fabrication done and ready for fitting to car , pretty sexy id say complete with new disc bells , hell of alot lighter than the standard uprights
RE: 306 rallye trackday project - Danny Wideboy - 17-11-2017
Thats some x rated porn there.
RE: 306 rallye trackday project - Blandy - 17-11-2017
This car is ridiculous lol seriously impressive at every update can’t wait to see it out in the flesh one day hats off to you
With your fibreglass/cabin skills will you look to make products to sell in the future?
RE: 306 rallye trackday project - twangy - 17-11-2017
(17-11-2017, 04:14 PM)Danny Wideboy Wrote: Thats some x rated porn there.
Told the missus it was Xxx rated but all she wanted to know was how much , women for you lol
(17-11-2017, 06:28 PM)Blandy Wrote: This car is ridiculous lol seriously impressive at every update can’t wait to see it out in the flesh one day hats off to you
With your fibreglass/cabin skills will you look to make products to sell in the future?
Cheers blandly , yes will be making bits shortly and having good clear out of garage as have loads of bits to get rid off , thanks for positive comments , rear axle getting widened , and ap calipers all round
RE: 306 rallye trackday project - Blandy - 17-11-2017
Nice will keep a eye out
RE: 306 rallye trackday project - twangy - 17-11-2017
(17-11-2017, 08:49 PM)Blandy Wrote: Nice will keep a eye outwhat part you after m8
RE: 306 rallye trackday project - Blandy - 17-11-2017
Once built so prob in early next year anything weight saving so bonnet boot doors etc
RE: 306 rallye trackday project - twangy - 17-11-2017
(17-11-2017, 09:16 PM)Blandy Wrote: Once built so prob in early next year anything weight saving so bonnet boot doors etc
phase 1 or 2 bonnet m8 and what material m8 glass or composite
RE: 306 rallye trackday project - Blandy - 17-11-2017
Phase 2 and either tbh will be for weight loss but still want it to look tidy
RE: 306 rallye trackday project - twangy - 17-11-2017
(17-11-2017, 09:29 PM)Blandy Wrote: Phase 2 and either tbh will be for weight loss but still want it to look tidyno problems m8
RE: 306 rallye trackday project - twangy - 22-11-2017
managed to fit engine and box to car , as made new engine mount to suit the chassis mount that i fitted when i tubbed the front inner arches, due to having to remove the original standard mounting point
RE: 306 rallye trackday project - twangy - 26-11-2017
started to get a load of engine fitted up over the weekend , starting to come together nicely
RE: 306 rallye trackday project - Eeyore - 27-11-2017
that looks fantastic. great work!
RE: 306 rallye trackday project - twangy - 09-12-2017
(27-11-2017, 11:46 AM)Eeyore Wrote: that looks fantastic. great work!cheers eeyore , have started to fit carbon /kevlar maxi airbox that i made and fitted radiator and am starting to finish wiring engine bay and fit up all parts tommorow
RE: 306 rallye trackday project - RallyeRed - 09-12-2017
Looks good Wayne - how was clearance from your air box to the rad?
Cheers
Iain
RE: 306 rallye trackday project - twangy - 09-12-2017
(09-12-2017, 06:39 PM)RallyeRed Wrote: Looks good Wayne - how was clearance from your air box to the rad?
Cheers
Iain
Cheers Iain , good clearance from airbox to rad mate , can be seen in 3rd picture down . Have also heat reflected taped underside of front airbox section
RE: 306 rallye trackday project - twangy - 15-12-2017
Santa has come early for the car , ap 4 pot brakes for front , and hopefully 2 pot ap for rear , also more new tyres for car to put on rims , this weekend will be doing more wiring , rear beam is getting widened as we speak , will post photos over weekend
RE: 306 rallye trackday project - hovis16 - 16-12-2017
Looking awesome
RE: 306 rallye trackday project - PugLee - 30-12-2017
(16-11-2017, 09:58 PM)twangy Wrote: picked up box of front suspension upright for car , all fabrication done and ready for fitting to car , pretty sexy id say complete with new disc bells , hell of alot lighter than the standard uprights
What are these made from?
The car looks beautiful by the way
RE: 306 rallye trackday project - twangy - 31-12-2017
(30-12-2017, 09:41 PM)PugLee Wrote:(16-11-2017, 09:58 PM)twangy Wrote: picked up box of front suspension upright for car , all fabrication done and ready for fitting to car , pretty sexy id say complete with new disc bells , hell of alot lighter than the standard uprights
What are these made from?
The car looks beautiful by the way
the upright are made of alloy , or mag/alloy , not 100% on what material , they are genuine work kitcar item though , also got front and rear calipers now , just waiting on the new pads to arrive and disc rotors
RE: 306 rallye trackday project - twangy - 21-01-2018
little update , managed to make mould for bonnet lamp pod and layed up a carbon fibre one , just in middle of finishing flatting it and fitting lights ,also made a carbon/kevlar maxi bumper lower lip and fitted to car , also fitted rear bumper to car properly and have now removed primed and painted ready for refitting , so thing are still getting done on car
RE: 306 rallye trackday project - Blandy - 21-01-2018
How loud is the maxi airbox set up? Really want to go for a enclosed system on mine to lower noise
RE: 306 rallye trackday project - Eeyore - 21-01-2018
those hubs look magical!
RE: 306 rallye trackday project - Paul Baldwin - 22-01-2018
This really is some project! Thanks for the regular updates
RE: 306 rallye trackday project - twangy - 26-01-2018
(21-01-2018, 06:04 PM)Eeyore Wrote: those hubs look magical!
Cheers eeyore , hell of a lot lighter than standard 306 ones
(22-01-2018, 02:15 PM)Paul Baldwin Wrote: This really is some project! Thanks for the regular updates
Cheers Paul , will keep update coming regular . Working on car this weekend so will make sure will post update
RE: 306 rallye trackday project - PugLee - 28-01-2018
How is the beam being widened?
RE: 306 rallye trackday project - twangy - 29-01-2018
(28-01-2018, 09:50 PM)PugLee Wrote: How is the beam being widened?
Lee beam is getting widened with new pins made out of higher spec material and alloy spacer and new bearing mounts and drive flanges as on 5 stud , as soon as arrive will post on forum , also using bells and ap rotors and ap 2 pot calipers
RE: 306 rallye trackday project - twangy - 06-02-2018
been a bit busy lately for car , but still trying to get the odd hour or two when i can , managed to prep and paint rear bumper and fit , also prepped light pod and painted , put graphics on before paint then removed so its in carbon fibre also front of pod is carbon fibre , outer lights are fitted just waiting on finding inner two ,picture of fully floating solid 260mm rear solid ap racing discs , and painted rear beam ready for rebuild , hopefully get more time on car shortly
RE: 306 rallye trackday project - Danny Wideboy - 07-02-2018
Awesome.
Keep it coming.
RE: 306 rallye trackday project - twangy - 16-02-2018
(07-02-2018, 06:36 PM)Danny Wideboy Wrote: Awesome.cheers danny , managed to fit the maxi width tubular wishbone ,just waiting on front rotors now ,and then set up front steering arms , few pics added
Keep it coming.