306 rallye trackday project - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20) +--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3) +--- Thread: 306 rallye trackday project (/showthread.php?tid=28088) |
RE: 306 rallye trackday project - twangy - 09-04-2017 managed to get a fair bit done on car over weekend , made some spare kevlar rear arches and some carbon / kevlar arch guards , as with thinking about doing rallying again am going to make full set of spare panels , also cleaned up all shocks and painted , fronts ready to be built after full overhaul , RE: 306 rallye trackday project - twangy - 13-05-2017 hi ,haven't been on forum for a while as not had much time with work , and haven't had much time to work on car , but first time in a while managed to get in garage for a few hours , so done a few pics of were she up to , planning on taking a week of next month so can get a load done to it , as been making and collecting bits together to finish her RE: 306 rallye trackday project - Magenta Sunset - 13-05-2017 look forward to seeing it finished & in the flesh one day RE: 306 rallye trackday project - MY95 - 15-05-2017 Looks awesome mate! Cant wait to see more updates RE: 306 rallye trackday project - twangy - 02-07-2017 (13-05-2017, 07:13 PM)Magenta Sunset Wrote: look forward to seeing it finished & in the flesh one day me too , just trying to find time to work on car , today was the first day have done something on it for months , made some maxi bumper pod moulds so can make some carbon fibre ones for car also have 306 maxi bonnet pod to mould so can also make out of carbon fibre RE: 306 rallye trackday project - twangy - 04-07-2017 (15-05-2017, 03:57 PM)MY95 Wrote: Looks awesome mate! Cant wait to see more updates thanks mate , fabricated some front maxi inner wheel arch extentions , just got to finish cutting out existing ones and start welding in the new ones ive made , then can repaint engine bay and start refitting engine and box RE: 306 rallye trackday project - Matt - 05-07-2017 This is mental, haven't read in a long time and just caught up. Looks great! RE: 306 rallye trackday project - 7057sam - 05-07-2017 I havent been on here in a awhile but this project still going strong and looking better than ever RE: 306 rallye trackday project - Ben - 05-07-2017 Inner arch extensions look good, but why are they needed? Surely if your increasing the front track the wheels would be further away than normal? RE: 306 rallye trackday project - twangy - 06-07-2017 (05-07-2017, 07:14 PM)Ben Wrote: Inner arch extensions look good, but why are they needed? Surely if your increasing the front track the wheels would be further away than normal? Ben inner arch extensions are put in as wheels sit more forward and are larger diameter wheels used , sure the track is widened , but still got to allow for when on full lock with steering , this is what the works 306 maxi had done to them, hope this explains your question RE: 306 rallye trackday project - twangy - 16-07-2017 moulded carbon fibre 306 maxi bumper spot light pods during one evening in week , so manage to remove from mould i made a few weeks back and here they are , also made carbon /kevlar maxi air box parts , wich are pictured , just need trimming and cleaning up RE: 306 rallye trackday project - hovis16 - 20-07-2017 Loving it. Keep up the good work RE: 306 rallye trackday project - twangy - 30-07-2017 (20-07-2017, 06:14 AM)hovis16 Wrote: Loving it. Keep up the good work cheers hovis. quick update of what got done this sunday .finished tubbing front arches ,just got to fit a new chassis engine mount now , and then can clean up and paint and also weld brackets on for strut brace , also sent some parts of for fabrication for new alloy front uprights , wich should be done in net couple of weeks , and started fitting lamps to maxi bumper pods RE: 306 rallye trackday project - twangy - 20-08-2017 quick update of whats been done on car this weekend , all tubbing of front wheel arches complete , new strut brace brackets welded on and new engine mount bracket welded in , primed and painted ready to start fitting back together now RE: 306 rallye trackday project - partybish - 21-08-2017 Nice progress, this is going to be an epic car when it's done! RE: 306 rallye trackday project - Eeyore - 21-08-2017 omg omg omg this is all so great great work! 306 rallye trackday project - bashbarnard - 21-08-2017 Looks epic. Why tube the fronts out of interest? Sent from my iPhone using Tapatalk RE: 306 rallye trackday project - welshpug - 21-08-2017 (06-07-2017, 04:23 PM)twangy Wrote: Ben inner arch extensions are put in as wheels sit more forward and are larger diameter wheels used , sure the track is widened , but still got to allow for when on full lock with steering , this is what the works 306 maxi had done to them, hope this explains your question (21-08-2017, 12:32 PM)bashbarnard Wrote: Looks epic. Why tube the fronts out of interest? see above. the tarmac maxi cars ran an 18" wheel with a 640 200 18 tyre IIRC, so a good two inches taller than a 195 55 15, something along the lines of a 205 45 18 on gravel I think they were runnign similar overall diameter on a 16", so along the lines of 185 65 16. this extra height as well as the additional castor but retaining the same strut top location meant the wheels were further forwards, not certain exactly how much but about an inch as well. 306 rallye trackday project - bashbarnard - 21-08-2017 Ah fail on my behalf there. Sorry everyone. Sent from my iPhone using Tapatalk RE: 306 rallye trackday project - twangy - 26-08-2017 managed to get a few bits done on car this afternoon , re fitted wings and started fitting out engine bay , hopefully try and get a few more things done over bank holiday , thanks for all positive comment , RE: 306 rallye trackday project - paulgtt - 13-09-2017 This looks immense, hats off to you for building something like this RE: 306 rallye trackday project - hovis16 - 02-10-2017 I need another update !!!!!! RE: 306 rallye trackday project - twangy - 02-10-2017 (02-10-2017, 08:23 AM)hovis16 Wrote: I need another update !!!!!! havent had a lot of time to work on car lately hovis , as waiting for some bits and with work commitments , were its up too now is have fitted front lights and bumper pods , and have been making new full lightweight motorsport braided loom for car with proper connections wich takes time in its self ,also got all tyres fitted onto speedline rims , wich has give me a load more space in mancave, hopefully going to get time on car this weekend , so will give proper update then RE: 306 rallye trackday project - Danny Wideboy - 02-10-2017 My God. (other deities are available.) That is the sex. Are you going to rally it? RE: 306 rallye trackday project - hovis16 - 02-10-2017 love it!! RE: 306 rallye trackday project - twangy - 02-10-2017 (02-10-2017, 07:37 PM)Danny Wideboy Wrote: My God. (other deities are available.) yes danny , have decided to build to use for stage rallying m8 , will also do the odd trackday and sprint in her as well RE: 306 rallye trackday project - hovis16 - 03-10-2017 twangy we no you are super busy but.....................fancy making me a carbon bonnet? hahaha no rush RE: 306 rallye trackday project - Matt-Rallye - 07-10-2017 Epic, epic progress being made! Top work as always so what engine spec are you going to be fitting into this? Full factory maxi rep? RE: 306 rallye trackday project - twangy - 18-10-2017 (07-10-2017, 08:47 PM)Matt-Rallye Wrote: Epic, epic progress being made! Top work as always so what engine spec are you going to be fitting into this? Full factory maxi rep? Rebuilt engine sitting in workshop , brief spec for now till next rebuild is 45 jenveys with Maxi airbox , Kent cams pt82 cams and vernier cam kit , fully lightened and balanced , pocketed Pistons , arp bolts , cometic gaskets, lightened and balanced flywheel, alloy crank pulley ,remote filter with oil cooler , helix paddle clutch , Efi Euro 1 ecu , wasted spark coil pack ,5 speed cr gearbox with 4.9 cwp with tranx plate diff and comp exhaust ,that will have to do for now till cars run in and tested Matt RE: 306 rallye trackday project - twangy - 07-11-2017 Quick update,In the middle of doing full braided Motorsport loom wich is nearly complete , gearbox getting fitted with 4.9 cwp then can fit engine and box then can make up new engine mount, hopefully picking up new front maxi style suspension next week as all machine work done ready for fitting , will add pictures over weekend |