+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Interior, Exterior, ICE (https://www.306oc.co.uk/forum/forumdisplay.php?fid=12)
+--- Thread: C*nting door speakers (/showthread.php?tid=27651)
C*nting door speakers - Paul_13 - 07-11-2014
Is there any front door speakers which are a direct fit?
I've bought some edge speakers and they don't fit in the hole. I bought speaker adapters, the adapters don't fit the doo.
Tried soo many different ways to try and fit them in getting pissed off
RE: Cunting for speakers - Eeyore - 07-11-2014
FLI Comp 6s are a straight fit. Apart from the soldering of wires, fitting the cross overs and tweeters.
I think you can buy just the woofer as a comp5 or something.
RE: Cunting for speakers - Toms306 - 07-11-2014
Might wanna check your title!
Also, most speakers require a small amount of door card trimmed off to fit, it's not seen though, just the 'stepped' part inside the hole.
RE: C*nting door speakers - Eeyore - 07-11-2014
the FLIs fit fine but I wouldnt recommend them. The Focal 165Vs i have are amazing but require spacers and you cant fit the original grille over them.
RE: C*nting door speakers - Paul_13 - 07-11-2014
Ok, was hoping not to chop the door card.
Might just sell these on and buy the fli's
RE: C*nting door speakers - Toms306 - 07-11-2014
Its a completely useless part of the door card though...you can still refit original speakers with it cut and cant see it without removing speaker first.
RE: C*nting door speakers - Midnightclub - 07-11-2014
I chopped out mine with a stanley blade, took 5 mins, like a knife through butter!
RE: C*nting door speakers - Alan_M - 08-11-2014
(07-11-2014, 05:20 PM)SRowell Wrote: the FLIs fit fine but I wouldnt recommend them. The Focal 165Vs i have are amazing but require spacers and you cant fit the original grille over them.
I've got the Focals in mine. Took a fair bit if chopping with a Dremel and a pair of adaptors, those Focals are deep! I got the adaptors that come with the wiring extensions saving you chopping the original connector off, except I'd already chopped them off!
I might have a spare set of the adaptors kicking about.
RE: C*nting door speakers - HD-Aye! - 08-11-2014
I had Rainbows. Bought 25mm mdf spacer rings and had to cut out the plastic. Just make slices in it the snap it with pliers. Easy enough if u can be bothered. Get some dynamat around the holes at the same time
رد: C*nting door speakers - Tito MaX - 09-11-2014
Hey guys iam new here and I from Egypt I was have Peugeot 205 and I sell it and I think to buy Peugeot 306 but I don't know which model I choose ?? Sorry I don't speak English well
Thanks,
(09-11-2014, 12:48 AM)Tito MaX Wrote: Hey guys iam new here and I from Egypt I was have Peugeot 205 and I sell it and I think to buy Peugeot 306 but I don't know which model I choose ?? Sorry I don't speak English well
Thanks,
C*nting door speakers - Razorback_Rob - 12-11-2014
Alpine SXE-1725S are a direct fit. Not bad replacement. Not as good as fli etc I don't think but still a good cheap upgrade.
(09-11-2014, 12:48 AM)Tito MaX Wrote: Hey guys iam new here and I from Egypt I was have Peugeot 205 and I sell it and I think to buy Peugeot 306 but I don't know which model I choose ?? Sorry I don't speak English well
Thanks,
(09-11-2014, 12:48 AM)Tito MaX Wrote: Hey guys iam new here and I from Egypt I was have Peugeot 205 and I sell it and I think to buy Peugeot 306 but I don't know which model I choose ?? Sorry I don't speak English well
Thanks,
Not really the right place to put this pal. But.. Depends if you want a diesel get an HDi. Xuds are okay but I would suggest an hdi.
Petrol there are many options but the best is the gti-6 then the xsi then the 1.8. I would stay away from the tu 8v engines personally.
RE: C*nting door speakers - spike2002 - 12-11-2014
Got some fli comp 6 for sale if you interested inbox me
RE: C*nting door speakers - Paul_13 - 15-11-2014
I gave fitting the speakers another go.
Trimmed the plastic away and they still wouldn't fit, so I bashed a bit of the door metal back top and bottom and one is in!
Ran out of light so doing other tomorrow along with fitting the solid rear beam mounts