+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Electrics (https://www.306oc.co.uk/forum/forumdisplay.php?fid=23)
+--- Thread: Galletto 1260 (/showthread.php?tid=27646)
Galletto 1260 - Dougieboy1 - 07-11-2014
I have paid for my map but cant get galletto 1260 to work can it run on any newer windows
RE: Galletto 1260 - cully - 07-11-2014
how did you read your map?
i suggest contacting your mapper for assistance if you read your map and cant write it
RE: Galletto 1260 - Dougieboy1 - 07-11-2014
I cant get the cable to load on my laptop
RE: Galletto 1260 - Toms306 - 07-11-2014
I've used Galletto on Win8 with a 306 without issue, a lot of people do have problems though.
RE: Galletto 1260 - lolsteve - 07-11-2014
Sometimes the gallettos are a bit broken, first one I bought wouldn't connect properly so got a second one and it's all fine
RE: Galletto 1260 - Dougieboy1 - 07-11-2014
It sayn no matching hardware contacted seller to get new 1 sent
RE: Galletto 1260 - Dougieboy1 - 10-11-2014
When reading file it says opening port impossible can any1 be of any help
RE: Galletto 1260 - Midnightclub - 10-11-2014
You need to ensure it's installed correctly, and that it's listed as a com port in device manager
Galletto 1260 - Razorback_Rob - 12-11-2014
Could be incorrect driver, go to hdi tuning website and download the software on there (should be under downloads) Try going into device manager (click start type run in the search box and in the run box type "mmc devmgmt.msc" without the " included. Inside find the device and then right click then press update driver, navigate to the folder that you downloaded from hdi tuning and it may work once you've updated. Just an idea.
RE: Galletto 1260 - Dougieboy1 - 13-11-2014
Was faulty eobd wire the solders inside were al messed up new 1 sent out today i hope as iv went for jammapic map and what i hear the results even just stage 1 pretty impressive from standard
RE: Galletto 1260 - cully - 14-11-2014
ive just installed a jammapic stg1+ map and im quite impressed even with a faulty MAF sensor
Galletto 1260 - Razorback_Rob - 14-11-2014
Impressive changes between stages
after standard power it's such a big change
RE: Galletto 1260 - Dougieboy1 - 14-11-2014
Good good as im looking forward that wee bit extra