Crank pulley REPLACED with pics!! - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16) +--- Forum: DW10 HDi section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=10) +--- Thread: Crank pulley REPLACED with pics!! (/showthread.php?tid=27281) |
Crank pulley REPLACED with pics!! - LewisG - 19-10-2014 Okay so I managed to get my old crank pulley off today EVENTUALLY Tried everything, impact gun, in gear with breaks ect all that stuff, in the end we got a chain wrench around the pulley and a massive breaker bar + extension bar to get it off, it was as tight as a**holes Heres the beast that got it off and the Lynx pulley from Dum Dum RE: Crank pulley torque - madmadmax - 19-10-2014 its a two stage so 40nm then 51 degreas or 195nm RE: Crank pulley torque - cully - 19-10-2014 hmm did mine by autodata yesterday 70Nm + 60degres RE: Crank pulley torque - LewisG - 19-10-2014 Okay cheers guys all done, scared the sh*t out of me though, whilst I was tightening the bolt there was a massive bang, thought Id broken something but it drives fine and is quieter if anythin |