GI 306 Black Rallye Shiney bits - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26) +--- Forum: Cars (https://www.306oc.co.uk/forum/forumdisplay.php?fid=21) +--- Thread: GI 306 Black Rallye Shiney bits (/showthread.php?tid=26768) |
GI 306 Black Rallye Shiney bits - hovis16 - 21-09-2014 Its hard for me write this but this may need to be done. Due to me being stupid this weekend I have ended up having to go to court. For this reason I regret to have to sell my pride and joy. From the day I got this car I spent hours enjoying it, working on it polishing it. Since owning her she has had regular services and oil changes and regular maintainance to keep her running well. Here are the following specs 145,000miles odd will confirm in the morning Gti/rallye/engine fully rebuilt at 110,000 New thicker repair gasket (to be safe) New bottom end bearings Complete rebuilt head via Pug Racing Peter T stage one exhaust and inlet cam Rich W lightened flywheel and pullie Removed resenator box Recently replaced cambelt and pump. New valeo clutch and clutch cable (less than 500miles) Compbrake quickshift Pugracing gear rods with new bronze bush Group N upper and lower engine mount Vibratechnis group N gearbox mount Brand new Nissens rad (purchased this month) Powersteering Relocation kit Bilstien B8s on eibachs lowered 30mm Vibratechnics P bush Recently fitted front bushes and droplinks Imaxles xsara oilite conversion rear beam Hybrid arb Pug racing beam mounts Xsara steering rack new arms and ends Scorpion exhaust with decat Black masks with 6000k hids Seat leon cupra spliter Omp bolt in cage Carbon fibre wrap doorhandle surround Carbon fibre mirror covers Carbon fibre wrap inner mirror covers Corbuea targa bucket seat mounted on Omp mounts Omp steering wheel Aftermarket 15" alloys with bridgestone and bf goodrich tyres. Please note if you are after a quite car this is far from that due to the soild mounts. This car was built to be a fun road/track car. Bad bits The bonnet is starting to rust by the washer jets Also a small bit of rust is starting to show on the bootlid and by the Rallye writing on the rear The passenger door has a dink from previous owner The exhaust baffes do make some noise and isn't quite in the right position due to my bad welding. A noise can be heard while driving sounds like driveshaft bearing. Changed clutch and gearbox to try solve this but the noise is still there. Has not affected the car in anyway. Part from the small usual dinks that is it. All of the work I have done has been added on my project thread but i will take some photos of the bits mentioned above. I would like this car to go to someone who is going to enjoy it as much as I did, and look after it as much as I have. Taxed till end of November and mot'd till June For this reason I willing to let her go for £2200 ono Will include 306 rack with new unfitted arms Spare Gearbox 21mm tb with a snapped bolt 5 litre of new silkolene pro s / Titan s New super4 spark plugs Oil filter I'd hate to take her to bits so someone please buy her. These cars are getting very rare and id hate to kill one off. Will post more recent photos soon Hovis [img]http://i418.photobucket.com/albums/pp263/hovis16/2012-05-06143323-1.jpg[/img RE: Tbc 306 Black Rallye Shiney bits - Matt - 22-09-2014 Nooooooooooooo! This car is too nice! It made me want to get my rallye! Good luck! RE: Tbc 306 Black Rallye Shiney bits - Toms306 - 22-09-2014 What did you do then?? RE: Tbc 306 Black Rallye Shiney bits - Paul_13 - 22-09-2014 (22-09-2014, 07:54 AM)Toms306 Wrote: What did you do then?? Keep it out of the thread, saves spamming it RE: Tbc 306 Black Rallye Shiney bits - Matt-Rallye - 23-09-2014 Please dont break this! this has been the inspiration to get mine looking nice again!! RE: Tbc 306 Black Rallye Shiney bits - toseland - 23-09-2014 you know matt.. your car sucks more than a certian person's blaze lol however i do echo the centament of some of the people on here.. PLEASE dont break this, its too much perfection to be throwing it all away. either way, GLWTS, and whatever trouble you're in. RE: Tbc 306 Black Rallye Shiney bits - Grant - 23-09-2014 Shame to hear mate. Hopefully things work out for the best. RE: Tbc 306 Black Rallye Shiney bits - hovis16 - 24-09-2014 Mileage is at 143,250. Checking diff bearing on weekend to confirm it is the driveshalf making noise. Also having hope that I may have some good news so I can keep her. Only gathering intest at the mo Dont mean to mess anyone about. Cant change the title from Tbc to interest apologies.....stupid phone Hovis RE: Tbc 306 Black Rallye Shiney bits - Dum-Dum - 26-09-2014 Your not messing anyone about mate. We all want to see you keep that beautiful car in tact. Glad its looking like good news for you. RE: Tbc 306 Black Rallye Shiney bits - Orta - 26-09-2014 I'm after some goodies mate if u break or return standard RE: Tbc 306 Black Rallye Shiney bits - mossy1985 - 06-10-2014 Now mate car looks great, if you are selling up I would be very interested, can you drop me a txt on 07795490948 cheers dave |