+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: Td04 air intake size on turbo (/showthread.php?tid=26699)
Td04 air intake size on turbo - Paul_13 - 17-09-2014
I don't have the turbo to hand as it's on the car.
I was thinking of going for the biggest reducer elbow as possible for the air intake
Anybody know the size?
RE: Td04 air intake size on turbo - padge - 17-09-2014
2.25" 57mm
RE: Td04 air intake size on turbo - Paul_13 - 18-09-2014
Cheers mate much appreciated
RE: Td04 air intake size on turbo - welshpug - 18-09-2014
Depends which td04...
RE: Td04 air intake size on turbo - ADV_93 - 18-09-2014
My TD04L has an inlet of 52 mm (2 inches) that's the pipe going ON to the turbo. The piping coming off the turbo, i used the standard boost pipe from my K14.
Just to clarify, is this for the pipe going ON to the turbo or the pipe coming OFF the turbo into the intercooler?
RE: Td04 air intake size on turbo - Paul_13 - 18-09-2014
Going onto the turbo.
A mikalor will squeeze it together
RE: Td04 air intake size on turbo - padge - 18-09-2014
I used a 57mm onto the intake, worked fine.
RE: Td04 air intake size on turbo - ADV_93 - 19-09-2014
(18-09-2014, 11:28 PM)padge Wrote: I used a 57mm onto the intake, worked fine.
A few millimeter difference shouldn't matter as a good jubyclippy will tighten it up. It's only a vacuum pipe
RE: Td04 air intake size on turbo - Ruan - 19-09-2014
If you can - use a reducer pipe to give you a 57mm onto the turbo but the inlet pipe staying at 63mm or bigger.
Especially if it's a remotely long pipe - remember about boundary layers! Look pipe from the airbox of a 136HDi - it's like 2 3/4" or so because of this!